Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: BENDCO INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BENDCO INC. in 801 HOUSTON AVE, PASADENA, TX 77502 (NAICS 332312). OSHA activity number 339020117.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bendco INC. for free Get an email when a new federal OSHA severe-injury report for Bendco INC. is published. One employer, no account, unsubscribe in one click.
Establishment
BENDCO INC.
Site address
801 HOUSTON AVE
City
PASADENA
State
TX
ZIP
77502
Mailing
801 HOUSTON AVE, PASADENA, TX 77502
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
35
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 28, 2013
Abate by
Jul 2, 2013
Penalty
Initial $2,975 · Current $1,785 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards while operating an overhead underhung crane hoist with a tied-back safety latch:    a)  On April 23, 2013, at the worksite where employees were exposed to struck-by hazards while using an overhead underhung crane whose hook had a safety latch that was non-functional due to it being tied back with duct tape. The employer failed to ensure that periodic inspections were being performed by an operator or qualified person for missing or defective/non-functioning equipment/parts.
Recent events (2)
  • · I (S) $1785
  • · Z (S) $2975

1910.157 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 28, 2013
Abate by
Jul 2, 2013
Penalty
Initial $2,380 · Current $1,428 Reduced
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:    a)  At the worksite and on April 23, 2013, a portable fire extinguisher located in Bay 3 was blocked by supplies and equipment.
Recent events (2)
  • · I (S) $1428
  • · Z (S) $2380

1910.179 L03 III D

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 28, 2013
Abate by
Jul 6, 2013
Penalty
Initial $3,570 · Current $2,142 Reduced
29 CFR 1910.179(l)(3)(iii)(d): Pendant control stations were not kept clean, and/or their function labels were not kept legible:    a)  At the worksite and on April 23, 2013, the pendant control for the 5 ton overhead underhung crane in Bay 2 had control buttons whose functions were not legible.
Recent events (2)
  • · I (S) $2142
  • · Z (S) $3570

1910.179 N04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 28, 2013
Abate by
Jul 2, 2013
Penalty
Initial $2,975 · Current $1,785 Reduced
29 CFR 1910.179(n)(4)(i): The upper limit switch of each hoist was not tried out under no load, at the beginning of each operator's shift:    a)  At the worksite and on April 23, 2013, the Shaw 5 ton overhead underhung crane's upper limit switch was not tested under no load prior to use.
Recent events (2)
  • · I (S) $1785
  • · Z (S) $2975

1910.184 E01

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 28, 2013
Abate by
Jul 6, 2013
Penalty
Initial $4,900 · Current $2,940 Reduced
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach:    a)   At the worksite and on April 23, 2013, a 2 leg chain sling had been used that did not have a permanently affixed identification that stated the size, grade, rated capacity and reach due to it not being legible.
Recent events (2)
  • · I (S) $2940
  • · Z (S) $4900

View Bendco INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339020117.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.