SAN ANTONIO, TX ·
OSHA Inspection: RAFAEL MONTES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAFAEL MONTES in 24611 CHIANTI WAY, SAN ANTONIO, TX 78260 (NAICS 238140). OSHA activity number 339025173.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAFAEL MONTES
- Site address
- 24611 CHIANTI WAY
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78260
- Mailing
- 21233 S. FM 471, NATALIA, TX 78059
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Jun 6, 2013
- Abate by
- Jun 16, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: On or about April 25, 2013, employees were exposed to being struck by welded scaffold frames up to approximately 18 feet in height, when not wearing hard hats, while moving the two sections in width, assembled scaffold.
Recent events (2)
- · I (S) $720
- · Z (S) $1200
1926.451 B01
- Issued
- Jun 6, 2013
- Abate by
- Jun 16, 2013
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): On or about April 25, 2013, employees were exposed to falls of up to approximately 14 feet in height to the ground level below, when working from the work platform of the scaffold, which had only two scaffold planks and approximately 3 feet apart on the second level, while installing the brick veneer to the front of the residential home.
Recent events (2)
- · I (S) $1440
- · Z (S) $2400
1926.451 B05 I
- Issued
- Jun 6, 2013
- Abate by
- Jun 16, 2013
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1926.451(b)(5)(i): The end of a platform 10 feet or less in length extended over its support more than 12 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees and/or materials without tipping, or has guardrails which block employee access to the cantilevered end: On or about April 25, 2013, employees were exposed to falls of approximately 14 feet in height to the ground level below, when employees stand on the cantilevered end of the work platform that extended approximately 24 inches beyond the scaffold frame support, while installing the brick veneer to the residential home.
Recent events (2)
- · I (S) $1440
- · Z (S) $2400
1926.451 E01
- Issued
- Jun 6, 2013
- Abate by
- Jun 16, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used: On or about April 25, 2013, employees were exposed to falls of approximately 14 feet in height to the ground level below, when working from the scaffold which did not have a ladder to the upper levels, while accessing and egressing the scaffold platforms.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
1926.451 G01
- Issued
- Jun 6, 2013
- Abate by
- Jun 16, 2013
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: On or about April 25, 2013, employees were exposed to falls of approximately 14 feet in height to the ground level below, when working from a scaffold which was not provided with a guard rail system, while installing the brick veneer to the residential home.
Recent events (2)
- · I (S) $1440
- · Z (S) $2400
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339025173.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.