SAINT JOSEPH, MO ·
OSHA Inspection: GLOGGNER METAL FABRICATORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GLOGGNER METAL FABRICATORS, INC. in 3336 PEAR STREET, SAINT JOSEPH, MO 64503 (NAICS 238220). OSHA activity number 339026288.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLOGGNER METAL FABRICATORS, INC.
- Site address
- 3336 PEAR STREET
- City
- SAINT JOSEPH
- State
- MO
- ZIP
- 64503
- Mailing
- 3336 PEAR STREET, SAINT JOSEPH, MO 64503
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 15
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.36 G02
- Issued
- May 7, 2013
- Abate by
- Jun 9, 2013
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points: a) Shop: The exit route by the South East Corner to the left of the overhead door was 20 inches in width at some points.
Recent events (2)
- · I (S) $714
- · Z (S) $1020
1910.212 A01
- Issued
- May 7, 2013
- Abate by
- Jun 9, 2013
- Penalty
- Initial $1,360 · Current $952 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Shop: The Lock Former Vertical Band Saw was not guarded with an adjustable guard for the saw blade. b) Shop: The Boschert Notcher foot pedal was not guarded from unintended operation as the cover to the foot pedal was broken.
Recent events (2)
- · I (S) $952
- · Z (S) $1360
1910.1200 F05 I
- Issued
- May 7, 2013
- Abate by
- Jun 9, 2013
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein: (a) A spray bottle by the notcher and overhead door did not have an identity label when it contained SharpCool Bandwsaw Chemical Cutting Fluid which will cause eye irritation.
Recent events (2)
- · I (S) $714
- · Z (S) $1020
1910.1200 F05 II
- Issued
- May 7, 2013
- Abate by
- Jun 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings: (a) A spray bottle by the notcher and overhead door did not have a hazard warning when it contained SharpCool Bandwsaw Chemical Cutting Fluid which will cause eye irritation.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 238220)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339026288.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.