Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: 1830 W. IRVING, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of 1830 W. IRVING, LLC in 1830 W. IRVING PARK RD., CHICAGO, IL 60613 (NAICS 236116). OSHA activity number 339029480.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch 1830 W. Irving, LLC for free Get an email when a new federal OSHA severe-injury report for 1830 W. Irving, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
1830 W. IRVING, LLC
Site address
1830 W. IRVING PARK RD.
City
CHICAGO
State
IL
ZIP
60613
Mailing
4005 N. WOLCOTT, CHICAGO, IL 60613
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
2
Ownership type
Private (A)

4 citations on file for this inspection.

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Jul 1, 2013
Abate by
Aug 16, 2013
Penalty
Initial $0 · Current $0

Hazardous substances S103

Construction Reference: 1926.59 NOTE: The requirements applicable to construction work under this section are identical to those set forth at � 1910.1200 of this chapter  29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) The employer did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:  1) Requirement for labeling of containers of hazardous chemicals; 2) Material safety data sheet availability; 3) Training of employees; 4) A complete list of hazardous chemicals known to be in the workplace; 5) Methods to inform employees of the hazards on non-routine tasks; and 6) Methods to inform other employer(s) of material safety data sheet availability; the labeling system; and any precautionary measures to protect employees.  On or about 26 April 2013, the employer did not develop a written hazard communication program.  Tile Installer(s) were exposed to hazardous chemical(s) (pH 12-13) containing crystalline silica while installing new tiles in the building lobby using mortar containing (up to 7% crystalline silica).  The tile installer used a Hilti DGA 450-S grinder to cut Rondine Gres Fine Porcellanato Italian Porcelain Tile to size then installed them using a prepared paste of VersaBond Fortified Thin Set Mortar (contains hazardous Crystalline Silica Quartz; Portland Cement; Ethylenevinylacetate Copolymer) .
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
Jul 1, 2013
Abate by
Aug 16, 2013
Penalty
Initial $400 · Current $225 Reduced

Hazardous substances S103

Construction Reference: 1926.59 NOTE: The requirements applicable to construction work under this section are identical to those set forth at � 1910.1200 of this chapter    29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) On or about 26 April 2013, the employer did not provide the employee(s) with training regarding the health hazards of Crystalline Silica.  Tile Installer(s) were exposed to hazardous chemical(s) (pH 12-13) containing crystalline silica while installing new tiles in the building lobby using mortar containing (up to 7% crystalline silica).  The tile installer used a Hilti DGA 450-S grinder to cut Rondine Gres Fine Porcellanato Italian Porcelain Tile to size then installed them using a prepared paste of VersaBond Fortified Thin Set Mortar (contains hazardous Crystalline Silica Quartz; Portland Cement; Ethylenevinylacetate Copolymer) .
Recent events (2)
  • · I (O) $225
  • · Z (O) $400

1910.1200 G01

Other-than-serious 2 instances 1 exposed
Issued
Jul 1, 2013
Abate by
Aug 16, 2013
Penalty
Initial $0 · Current $0

Hazardous substances S103

Construction Reference: 1926.59 NOTE: The requirements applicable to construction work under this section are identical to those set forth at � 1910.1200 of this chapter.  29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use:  a) On or about 26 April 2013, the employer did not have a Material Safety Data Sheet (MSDS) for each of the hazardous chemicals used in the work.  Tile Installer(s) were exposed to hazardous chemical(s) (pH 12-13) containing crystalline silica while installing new tiles in the building lobby using mortar containing (up to 7% crystalline silica).  The tile installer used a Hilti DGA 450-S grinder to cut Rondine Gres Fine Porcellanato Italian Porcelain Tile to size then installed them using a prepared paste of VersaBond Fortified Thin Set Mortar (contains hazardous Crystalline Silica Quartz; Portland Cement; Ethylenevinylacetate Copolymer).
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1926.95 A

Other-than-serious 1 instance 1 exposed
Issued
Jul 1, 2013
Abate by
Jul 12, 2013
Penalty
Initial $400 · Current $225 Reduced
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided:    a) On or about 26 April 2013, the employer did not select and require use of appropriate hand protection (gloves) by the tile installer. The worker had a dermal exposure to VersaBond Fortified Thin Set Mortar paste (contains up to 7% Crystalline Silica; pH 12-13 in the final product) which he used when installing Rondine Gres Fine Porcellanato Italian Porcelain Tile in the lobby of the building.
Recent events (2)
  • · I (O) $225
  • · Z (O) $400

View 1830 W. Irving, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339029480.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.