Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: RANDALL MAULL ELECTRIC SERVICES

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of RANDALL MAULL ELECTRIC SERVICES in 6616 95TH ST., OAK LAWN, IL 60453 (NAICS 238210). OSHA activity number 339032252.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Randall Maull Electric Services for free Get an email when a new federal OSHA severe-injury report for Randall Maull Electric Services is published. One employer, no account, unsubscribe in one click.
Site address
6616 95TH ST.
City
OAK LAWN
State
IL
ZIP
60453
Mailing
4001 E. 134TH STREET #24, CHICAGO, IL 60633
Inspection type
Programmed Related (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
2
Ownership type
Private (A)

4 citations on file for this inspection.

1926.20 B01

Serious Gravity 1 1 instance 2 exposed
Issued
May 20, 2013
Abate by
Jun 14, 2013
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part.  a.  On or about April 29, 2013 - at the above addressed jobsite, the employer did not initiate and maintain an accident prevention program and/or safety and health program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to live electrical parts.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1926.20 B02

Serious Gravity 1 1 instance 2 exposed
Issued
May 20, 2013
Abate by
Jun 14, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.  a.  On or about April 29, 2013 - at the above addressed jobsite, an inspection was not conducted by a competent person capable of recognizing and correcting hazards associated with electrocution, which could result in employee injuries.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.405 B02

Serious Gravity 5 1 instance 2 exposed
Issued
May 20, 2013
Abate by
May 24, 2013
Penalty
Initial $2,400 · Current $1,200 Reduced
29 CFR 1926.405(b)(2): Covers and canopies. All pull boxes, junction boxes, and fittings shall be provided with covers. If metal covers are used, they shall be grounded. In energized installations each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear.  a.  On or about April 29, 2013 - at the above addressed jobsite, employees were walking/working around, and/or using electrical outlets and light switches that were not provided with covers or face plates to protect against accidental contact, thereby exposing the employees to electrical hazards.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2400

1926.405 D

Serious Gravity 5 1 instance 2 exposed
Issued
May 20, 2013
Abate by
May 24, 2013
Penalty
Initial $2,400 · Current $1,200 Reduced
29 CFR 1926.405(d): Switchboards and panelboards. Switchboards that have any exposed live parts shall be located in permanently dry locations and accessible only to qualified persons. Panelboards shall be mounted in cabinets, cutout boxes, or enclosures designed for the purpose and shall be dead front. However, panelboards other than the dead front externally-operable type are permitted where accessible only to qualified persons. Exposed blades of knife switches shall be dead when open.  a.  On or about April 29, 2012 - at the above addressed jobsite, four (4) electrical panels were not protected with covers, thereby exposing employees to arc flash/blast hazards.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2400

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339032252.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.