AVENEL, NJ —
OSHA Inspection: MICHAEL ANTHONY SIGN DESIGN, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MICHAEL ANTHONY SIGN DESIGN, INC. in 21 RANDOLPH AVENUE, AVENEL, NJ 07001 (NAICS 339950). OSHA activity number 339034159.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MICHAEL ANTHONY SIGN DESIGN, INC.
- Site address
- 21 RANDOLPH AVENUE
- City
- AVENEL
- State
- NJ
- ZIP
- 07001
- Mailing
- 21 RANDOLPH AVENUE, AVENEL, NJ 07001
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.37 A03
- Issued
- Jun 13, 2013
- Abate by
- Jun 13, 2013
- Penalty
- Initial $2,200 · Current $2,200
General-duty citation text
29 CFR 1910.37(a)(3): Exit routes were not continuously maintained free of obstructions or impediments to full instant use in the case of fire or other emergency: a) Michael Anthony Sign Design, Inc./Avenel, NJ facility- Welding Area of the Shop: The emergency exit door was blocked by concrete slab preventing opening of the door. Condition observed on or about May 1, 2013.
Recent events (3)
- — A (S) $2200
- — I (S) $1100
- — Z (S) $2200
1910.134 E01
- Issued
- Jun 13, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $1,760 · Current $1,760
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or was required to use the respirator in the workplace: a) Michael Anthony Sign Design, Inc./Avenel, NJ- Shop Area: Employee, who was required to wear respirator, such as 3M full face respirator, was not provided a medical evaluation prior to the use of the respirator in the workplace. Condition observed on or about May 1, 2013.
Recent events (3)
- — A (S) $1760
- — I (S) $880
- — Z (S) $1760
1910.134 K03
- Issued
- Jun 13, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: a) Michael Anthony Sign Design, Inc./Avenel, NJ- Shop Area: The employer did not provide comprehensive and understandable training to employee required to use Full face (3M) respirator at work place. Condition observed on or about May 1, 2013.
Recent events (3)
- — A (S) $0
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Jun 13, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $2,200 · Current $2,200
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Michael Anthony Sign Design, Inc./Avenel, NJ- Welding Area: Hard wired electrical cord used to power welding equipment was not installed as per standard requirements. Condition observed on or about May 1, 2013.
Recent events (3)
- — A (S) $2200
- — I (S) $1100
- — Z (S) $2200
1910.305 B01 II
- Issued
- Jun 13, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in electrical cabinets, boxes, and fittings were not effectively closed. a) Michael Anthony Sign Design, Inc./Avenel, NJ- Shop Area: Electrical box which controls equipment such as but not limited to chop saw had exposed live bus bars. Condition observed on or about May 1, 2013.
Recent events (3)
- — A (S) $0
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Jun 13, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) Michael Anthony Sign Design, Inc./Avenel, NJ- Welding Area: Hard wired electrical cord used to power welding equipment had exposed wires due to missing strain relief. Condition observed on or about May 1, 2013.
Recent events (3)
- — A (S) $0
- — I (S) $0
- — Z (S) $0
More inspections at Michael Anthony Sign Design, INC.
View Michael Anthony Sign Design, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339034159.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.