MARIETTA, GA —
OSHA Inspection: JAVIER VEGA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JAVIER VEGA in 519 WINDING RIDGE CIRCLE POLK STREET DEV, MARIETTA, GA 30064 (NAICS 238130). OSHA activity number 339042046.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JAVIER VEGA
- Site address
- 519 WINDING RIDGE CIRCLE POLK STREET DEV
- City
- MARIETTA
- State
- GA
- ZIP
- 30064
- Mailing
- 1549 KNOX DRIVE APT A6, MARIETTA, GA 30060
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Sep 23, 2013
- Abate by
- Oct 1, 2013
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. (a) 519 Winding Ridge Circle, Marietta, GA. - On the front side roof of a residential home, an employee was not protected from eye injuries while performing sheathing activities with a pneumatic Hitachi Model-NR83 AB2 Strip Framing Nailer, as this tool was operated without safety glasses.
Recent events (1)
- — Z (S) $1600
1926.403 B02
- Issued
- Sep 23, 2013
- Abate by
- Oct 1, 2013
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: (a): On the front of new residential construction located at 519 Winding Ridge Circle, Marietta, Ga: Employees were exposed to a shock hazard while using a Rolocatable Power Tap to supply power to an air compressor and a Hitachi Strip Framing Nailer. The Relocatable Power Tap was not used in accordance with listing and labeling, in that it was used outdoors to power construction equipment.
Recent events (1)
- — Z (S) $1600
1926.501 B13
- Issued
- Sep 23, 2013
- Abate by
- Oct 1, 2013
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b)(13): a) 519 Winding Ridge Circle, Marietta, Ga., On the front of a residential home, the employer failed to provide fall protection for two employees performing sheathing activities, heights exceeding 25 feet above ground level, exposing the employees to a fall hazard.
Recent events (1)
- — Z (S) $2800
1926.503 A01
- Issued
- Sep 23, 2013
- Abate by
- Oct 1, 2013
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who was exposed to fall hazards that enabled each employee to recognize the hazards of falling and train each employee in the procedures to be followed in order to minimize these hazards. a) 519 Winding Ridge Circle, Marietta, GA., Two employees working on the roof of a residential home, were not trained as to the hazards related to falls and preventative measures necessary to minimize fall hazards.
Recent events (1)
- — Z (S) $1600
More inspections at Javier Vega
View Javier Vega's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339042046.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.