LIBERTYVILLE, IL —
OSHA Inspection: STONE CORNER CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STONE CORNER CONSTRUCTION, INC. in 234 COOK, LIBERTYVILLE, IL 60048 (NAICS 238140). OSHA activity number 339053654.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STONE CORNER CONSTRUCTION, INC.
- Site address
- 234 COOK
- City
- LIBERTYVILLE
- State
- IL
- ZIP
- 60048
- Mailing
- 7600 W. 123RD PLACE, PALOS HEIGHTS, IL 60463
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Jul 3, 2013
- Abate by
- Jul 10, 2013
- Penalty
- Initial $1,600 · Current $750 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a) Employees were required to cut stone materials using a DeWalt saw without being provided with eye and face protection. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $750
- — Z (S) $1600
1926.501 B13
- Issued
- Jul 3, 2013
- Abate by
- Jul 10, 2013
- Penalty
- Initial $1,600 · Current $750 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) Employees were not protected from the hazard of falling approximately 14 feet while working from a low slope roof deck. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $750
- — Z (S) $1600
1910.1200 E01
- Issued
- Jul 3, 2013
- Abate by
- Jul 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.59: Note: The requirements applicable to construction work under this section are identical to those set forth at 1910.1200 of this chapter. 29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) The employer did not develop, implement, and maintain a written hazard communication program where employees were required to use Spec Mix Stone Veneer Mortar and Spec Mix Type S Mortar, and were also required to cut Dolomitic Limestone that had been quarried. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Jul 3, 2013
- Abate by
- Jul 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.59: Note: The requirements applicable to construction work under this section are identical to those set forth at 1910.1200 of this chapter. 29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Employees were not provided with information and training when required to use Spec Mix Stone Veneer Mortar and Spec Mix Type S Mortar, and were also required to cut Dolomitic Limestone that had been quarried. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Stone Corner Construction, INC.
View Stone Corner Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339053654.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.