Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: S AND J LUMBER

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of S AND J LUMBER in 3667 GARNERS FORD RD, THURMAN, OH 45685 (NAICS 321113). OSHA activity number 339053829.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch S and J Lumber for free Get an email when a new federal OSHA severe-injury report for S and J Lumber is published. One employer, no account, unsubscribe in one click.
Establishment
S AND J LUMBER
Site address
3667 GARNERS FORD RD
City
THURMAN
State
OH
ZIP
45685
Mailing
3667 GARNERS FORD RD, THURMAN, OH 45685
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
8
Ownership type
Private (A)

8 citations on file for this inspection.

1910.132 D01

Serious Gravity 1 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 25, 2013
Penalty
Initial $1,020 · Current $408 Reduced
29 CFR 1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):  a.  At the work site, the employer did not perform a work place assessment to determine the required personal protective equipment that would be needed for each task performed.
Recent events (2)
  • · I (S) $408
  • · Z (S) $1020

1910.147 C06 II

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 25, 2013
Penalty
Initial $1,700 · Current $680 Reduced
29 CFR 1910.147(c)(6)(ii): The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection:  a. At the site, the employer did not certify that a periodic inspection was performed at least annually to ensure employees were following lock-out/tag-out procedures correctly.
Recent events (2)
  • · I (S) $680
  • · Z (S) $1700

1910.147 C07 I A

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 25, 2013
Penalty
Initial $1,700 · Current $680 Reduced
29 CFR 1910.147(c)(7)(i)(A): Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:  a. At the work site, the employer did not provide training to authorized employees that performed lockout/tagout procedures on machines such as but not limited to, the band mill machine and the edger machine.
Recent events (2)
  • · I (S) $680
  • · Z (S) $1700

1910.147 C07 I B

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i)(B): Each affected employee shall be instructed in the purpose and use of the energy control procedure:  a.  At the work site, the employer did not provide training to affected employees in the purpose and use of energy control procedures in the areas where lock-out/tag-out was performed.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.151 C

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 2, 2013
Penalty
Initial $2,040 · Current $816 Reduced
29 CFR 1910.151(c): Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use:  a.  At the job site, the employer did not ensure that an eyewash station was available for immediate emergency use when employees were transferring corrosive chemicals from 55 gallon drum to be mixed and diluted.
Recent events (2)
  • · I (S) $816
  • · Z (S) $2040

1910.253 B04 I

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Penalty
Initial $1,700 · Current $680 Reduced
29 CFR 1910.253(b)(4)(i): Oxygen cylinders shall not be stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders, or near any other substance likely to cause or accelerate fire; or in an acetylene generator compartment:  a.  Inside the facility, the employer did not ensure that oxygen tanks and acetylene tanks were stored separately.
Recent events (2)
  • · I (S) $680
  • · Z (S) $1700

1910.1200 E01

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 25, 2013
Penalty
Initial $2,040 · Current $816 Reduced
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met:  a.  At the site, the employer did not develop a written hazard communication program at the facility where employees used chemicals such as but not limited to Sta Brite P, Diesel Fuel Supplement Advanced Formula-Cetane Boost and Bar and Chain Lubricant.
Recent events (2)
  • · I (S) $816
  • · Z (S) $2040

1910.1200 H01

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 23, 2013
Abate by
Aug 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and material safety data sheets:  A.  At the work site, the employer did not train employees on the hazards associated with the hazardous chemicals used such as but not limited to, Bar & Chain Lubricant, Diesel Fuel Supplement Advanced Formula-Cetane Boost and Sta Brite P.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339053829.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.