NEW HARTFORD, NY ·
OSHA Inspection: COOK H.V.A.C.R. SERVICES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COOK H.V.A.C.R. SERVICES in OLIVE GARDEN, 4636 COMMERCIAL DRIVE, NEW HARTFORD, NY 13413 (NAICS 238220). OSHA activity number 339054512.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COOK H.V.A.C.R. SERVICES
- Site address
- OLIVE GARDEN, 4636 COMMERCIAL DRIVE
- City
- NEW HARTFORD
- State
- NY
- ZIP
- 13413
- Mailing
- 6477 OWENSBORO ROAD, LEITCHFIELD, KY 42754
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 2
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.403 B02
- Issued
- Jun 12, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) Kitchen area, on or about 5-8-13: One employee was using a reciprocating saw and scissor lift that were plugged into a "quad" receptacle box/cord assembly that was not being used as it was designed or as "listed and labeled".
Recent events (1)
- · Z (S) $1600
1926.404 A02
- Issued
- Jun 12, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(a)(2): A grounded conductor was attached to a terminal or lead so as to reverse designated polarity: a) Kitchen area, on or about 5-8-13: One employee was using a reciprocating saw and scissor lift that were plugged into a "quad" receptacle box/cord assembly that was improperly wired, reversing the designated polarity.
Recent events (1)
- · Z (S) $0
1926.404 B01 II
- Issued
- Jun 12, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection: a) Kitchen area, on or about 5-8-13: One employee was using a reciprocating saw and scissor lift that were plugged into a power source that was not protected by a ground fault circuit interrupter (GFCI).
Recent events (1)
- · Z (S) $0
1926.404 F06
- Issued
- Jun 12, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Kitchen area, on or about 5-8-13: One employee was using a reciprocating saw and scissor lift that were plugged into a power source that did not have a continuous path to ground due to a missing a ground pin.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 238220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339054512.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.