OSHA Inspection: ALOHA KEY AWARDS & GIFTS

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $1600.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":    FACILITY:  Building exits were not clearly marked with Exit signs.

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $1600.00 · Current $2000.00

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Facility:  The Delta drill press was not equipped with a chuck guard.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $2000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:    WORKSHOP:  The benchtop grinders, used for grinding metal parts/keys, was not equipped with proper guarding.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:    WORKSHOP:   1)  The belt-driven bench top grinder, used to form metal parts/keys, was not equipped with a work rest.  2)  The Easisharp grinder, used to form metal parts/keys, was not equipped with a work rest.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:    WORKSHOP:  The bench top grinders, used by the employee to form metal parts/keys, was not equipped with a tongue guard.

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $1600.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):     WORKSHOP:    1)  The pulleys for the belt driven bench grinder, used to form metal parts/keys, were not guarded.  2)  The pulleys of the belt driven key cutting machine, used to make keys, were not guarded.

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):     WORKSHOP:    1)  The belt driven bench grinder, used by the employee to form metal parts/keys, was not equipped with belt guards.  2)  The belt driven key maker, used by the employee to fabricate keys, was not equipped with belt guards.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $1600.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel:     WORKSHOP:  The right angle grinders, used by the employee to cut locks, were not equipped with safety guards.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $1600.00 · Current $1250.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:     WORKSHOP:  The Relocateable Power Tap (RPT), used by the employer to power tools and machinery, was not used according to its listing and labeling instructions.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:   WORKSHOP:  The Relocateable Power Tap (RPT), used to power industrial tools and machinery in the workshop, was used in place of permanent wiring.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors:  WORKSHOP:  The flexible extension cord of the Relocateable Power Tap (RPT) was run through a hole in the wall to an outlet on the other side.

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $1200.00 · Current $1250.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:     FACILITY:  The employer did not have a written hazardous communication program.

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use:     FACILITY:  The employer did not material safety data sheets for any of the hazardous chemical products on site.

Issued

2013-05-31 00:00:00

Abate by

2013-07-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    FACILITY:  Employees were not provided effective information and training on hazardous chemicals in the workplace.

Issued

2013-05-31 00:00:00

Abate by

2013-06-26 00:00:00

Penalty

Initial $400.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1904.4(a): The employer did not keep records of work-related fatalities, injuries or illnesses on the OSHA Form 300 or equivalent.     FACILITY: On or about May 9, 2013, the employer did not maintain OSHA Form 300 or equivalent for the years 2012, 2011 or 2010.

Issued

2013-05-31 00:00:00

Abate by

2013-06-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:   Facility:  The portable fire extinguishers, throught the building, were not inspected annually.