Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DENT WIZARD

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of DENT WIZARD in 200 MAIN STREET SOUTH, MANVILLE, NJ 08835 (NAICS 811121). OSHA activity number 339062317.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dent Wizard — free Get an email when a new federal OSHA severe-injury report for Dent Wizard is published. One employer, no account, unsubscribe in one click.
Establishment
DENT WIZARD
Site address
200 MAIN STREET SOUTH
City
MANVILLE
State
NJ
ZIP
08835
Mailing
4710 EARTH CITY EXPRESSWAY, BRIDGETON, MO 63044
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
2
Ownership type
A

4 citations on file for this inspection.

1910.106 E02 IV D

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2013
Abate by
Oct 3, 2013
Penalty
Initial $3,400 · Current $3,400
29 CFR 1910.106(e)(2)(iv)(d): Flammable or combustible liquids were not drawn from or transferred into vessel(s), container(s), or portable tank(s) within a building through a closed piping system, from safety cans, by means of a device drawing through the top, or from a container or portable tank by gravity through an approved self-closing valve:             Dent Wizard/ Manville NJ site:  Safety cans were not provided and/or used in areas including, but not limited to the prefabricated metal tent where products including, but not limited to lacquer thinner (ASW M-0012) and PNT Fast Lacquer Thinner (Class II Flammable liquid), are dispensed and/or stored after being opened.    Condition observed on/or about 05/10/13.
Recent events (1)
  • — Z (S) $3400

1910.1200 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2013
Abate by
Oct 3, 2013
Penalty
Initial $3,400 · Current $3,400
29 CFR 1910.1200(e)(1): The employer had not developed or implemented a written hazard communication program which describes how the criteria in 29 CFR 1910.1200 (f), (g), and (h) will be met:       a) Dent Wizard/ NJ site: A site specific written hazard communication program, which includes, but not limited to training, chemical list and availability of material safety data sheets was not available upon request at the site location.   Observed on/or about 05/10/13.
Recent events (1)
  • — Z (S) $3400

1910.1200 G01

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 16, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:             a)  Dent Wizard/ Manville NJ site: Safety data sheet(s) were not available upon request at the site location where employees are exposed to hazardous chemicals which include, but not limited to lacquer thinner (ASW M-0012) and PNT 10 Fast Lacquer thinner.   Observed on/or about 05/10/13.
Recent events (1)
  • — Z (S) $0

1910.132 D02

Other-than-serious 1 instance 1 exposed
Issued
Aug 16, 2013
Abate by
Oct 3, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.132 (d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment of hazard assessment.              a)Dent Wizard/ NJ site - A workplace hazard assessment was  not conducted to ensure that personal protective equipment are not randomly selected for use without the employer determining if they are adequate for the job.    Condition observed on/or about 05/10/2013.
Recent events (1)
  • — Z (O) $0

View Dent Wizard's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339062317.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.