APPLETON, WI ·
OSHA Inspection: THE BOLDT COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of THE BOLDT COMPANY in 1506 S. ONEIDA STREET, APPLETON, WI 54915 (NAICS 236220). OSHA activity number 339064917.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE BOLDT COMPANY
- Site address
- 1506 S. ONEIDA STREET
- City
- APPLETON
- State
- WI
- ZIP
- 54915
- Mailing
- P.O. BOX 419, APPLETON, WI 54912
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 1250
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.1400 F
- Issued
- Jul 18, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1926.1400(f): The employer did not establish, effectively communicate to the relevant persons, and/or enforce work rules to ensure compliance with the provisions of the Standard which direct an operator, crewmember, or other employee to take certain actions: a) On or before 05-08-13, employer did not effectively communicate, train or enforce work area control safety rules to employees working within the crane operations area and swing radius of a Manitowoc 3900 140 ton crawler crane. Abatement Certification and Abatement Documentation required
Recent events (2)
- · I (O) $7000
- · Z (S) $7000
1926.1424 A03 I
- Issued
- Jul 18, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1424(a)(3)(i): When an employee goes to a location in the hazard area that is out of view of the operator, the employee (or someone instructed by the employee) did not ensure that the operator is informed that he/she is going to that location: a) On or before 05-08-13, an employee who was performing maintenance on a Manitowoc 3900 140 ton crawler crane during crane operations entered the swing radius without using a form of communication with the crane operator prior to entering the swing radius. Abatement Certification and Abatement Documentation required
Recent events (2)
- · I (O) $0
- · Z (S) $0
1926.1424 A03 II
- Issued
- Jul 18, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1424(a)(3)(ii): Where the operator knows that an employee goes to a location covered by paragraph (a)(1) of this section, the operator did rotate the superstructure prior to the operator being informed in accordance with a pre-arranged system of communication that the employee was in a safe position: a) On or before 05-08-13, a Crane Operator who was rotating the superstructure of a Manitowoc 3900 140T crawler crane did not plan or use a form of communication with an employee who was oiling and maintaining the crane. This employee was working within the swing radius during crane operations. Abatement Certification and Abatement Documentation required
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.1430 E
- Issued
- Jul 18, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1430(e): 29 CFR 1926.1430(e): The employer did not train each employee who works with the equipment to keep clear of holes, and crush/pinch points and the hazards addressed in � 1926.1424 (Work area control): a) On or before 05-08-13, the employer did not provide company employee work area control safety training to an employee oiling and maintaining the crane at the site. Abatement Certification and Abatement Documentation required
Recent events (2)
- · I (S) $0
- · Z (S) $7000
1926.1430 G01
- Issued
- Jul 18, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1430(g)(1): Training administration: The employer did not evaluate each employee required to be trained under this subpart to confirm understanding of the training: a) On or before 05-08-13, the employer did not provide an evaluation of the safety training for an employee performing oiling and otherwise maintaining the crane at the site prior to work performed within the swing radius on a Manitowoc 3900 140 ton crawler crane during crane operation. Abatement Certification required
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at The Boldt Company
View The Boldt Company's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339064917.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.