WASHINGTON, DC —
OSHA Inspection: ATLAS WELDING AND FABRICATION INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of ATLAS WELDING AND FABRICATION INC. in 50 IRVING STREET, WASHINGTON, DC 20001 (NAICS 622110). OSHA activity number 339072092.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATLAS WELDING AND FABRICATION INC.
- Site address
- 50 IRVING STREET
- City
- WASHINGTON
- State
- DC
- ZIP
- 20001
- Mailing
- 728 GRANTHAM LN, NEW CASTLE, DE 19720
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 622110
- Employees
- 20
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.501 B01
- Issued
- Jun 11, 2013
- Abate by
- Jun 15, 2013
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Employee on a walking/working surface (horizontal and vertical surface) with unprotected sides or edge, 6 feet (1.8 m) or more above the lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. (a) 5th Floor Roof Area C Wing of Hospital - Employee observed preparing the floor and floor edge for spot welding was not protected from falling 15 feet to the next lower level, on or about 05/13/13. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1926.1052 C01 I
- Issued
- Jun 11, 2013
- Abate by
- Jun 15, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.1052(c)(1)(i): Stairway having 4 or more risers was not equipped with at least one handrail. (a) 4C Wing Construction Project Stairway - A 13 step prefab steel stairway used by employees to gain access to the 5th floor from the 4th floor was not equipped with a handrail, exposing workers to a fall of 15 feet or less on or about 05/13/13. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1926.1052 C01 II
- Issued
- Jun 11, 2013
- Abate by
- Jun 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairway having four or more risers was not equipped with one stair rail system along each unprotected side or edge. (a) 4C Wing Construction Project Stairway - A 13 step prefab steel stairway used by employees to gain access to the 5th floor from the 4th floor was not equipped with a stair rail system, exposing workers to a fall of 15 feet or less on or about 05/13/13. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of the abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Atlas Welding and Fabrication INC.
View Atlas Welding and Fabrication INC.'s full OSHA safety record →
More inspections in this industry (NAICS 622110)
More inspections in DC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339072092.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.