MESQUITE, TX ·
OSHA Inspection: VALASQUEZ CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VALASQUEZ CONSTRUCTION in 3726 TOWNE CROSSING BOULEVARD, MESQUITE, TX 75150 (NAICS 238130). OSHA activity number 339072761.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VALASQUEZ CONSTRUCTION
- Site address
- 3726 TOWNE CROSSING BOULEVARD
- City
- MESQUITE
- State
- TX
- ZIP
- 75150
- Mailing
- 614 N. ROGERS, IRVING, TX 75061
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 2
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Jun 19, 2013
- Abate by
- Jul 1, 2013
- Penalty
- Initial $1,600 · Current $600 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: This violation most recently occurred on May 16, 2013, at a workplace located at 3726 Towne Crossing Boulevard, Mesquite, Texas 75150; where; Instance a) At least one (1) employee used a Hitachi NR83A2 3 1/4 inch framer nailer without the use of protective eyewear; Instance b) At least one (1) employee used a Makita 5007NB circular saw without the use of protective eyewear.
Recent events (2)
- · I (S) $600
- · Z (S) $1600
1926.304 D
- Issued
- Jun 19, 2013
- Abate by
- Jul 1, 2013
- Penalty
- Initial $2,000 · Current $600 Reduced
General-duty citation text
29 CFR 1926.304(d): Portable, power-driving circular saw(s) were not equipped with a guard above and below the base plate or shoe: This violation most recently occurred on May 16, 2013, at a commercial building under construction located at 3726 Towne Crossing Boulevard, Mesquite, TX 75150; where at least one (1) employee used an electric circular saw that had a wood chip wedged in the guard, rendering the guard ineffective. The employee was exposed to amputation and severe laceration hazards.
Recent events (2)
- · I (S) $600
- · Z (S) $2000
1926.451 E01
- Issued
- Jun 19, 2013
- Abate by
- Jul 1, 2013
- Penalty
- Initial $2,000 · Current $600 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar structure was not used: This violation most recently occurred on May 16, 2013, at a workplace located at 3726 Towne Crossing Boulevard, Mesquite, Texas 75150; where at least one (1) employee used the scaffold end brace to egress scaffold.
Recent events (2)
- · I (S) $600
- · Z (S) $2000
1926.451 G01 VII
- Issued
- Jun 19, 2013
- Abate by
- Jul 1, 2013
- Penalty
- Initial $2,800 · Current $600 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section: This violation most recently occurred on May 16, 2013, at a workplace located at 3726 Towne Crossing Boulevard, Mesquite, TX 75150; where at least one (1) employee was working from a scaffold, not protected from falling an approximate 12-feet, to the ground level below.
Recent events (2)
- · I (S) $600
- · Z (S) $2800
1926.451 B02
- Issued
- Jun 19, 2013
- Abate by
- Jul 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway was not at least 18 inches wide: This violation most recently occurred on May 16, 2013, at a workplace located at 3726 Towne Crossing Boulevard, Mesquite, TX 75150; where at least two (2) employees worked from a job-built, single-pole scaffold whose walkways were only 11 1/2 inches wide.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.452 A04
- Issued
- Jun 19, 2013
- Abate by
- Jul 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(a)(4): 29 CFR 1926.452(a)(4): Diagonal bracing in both directions was not installed across the entire outside face of all double-and single-pole scaffolds: This violation most recently occurred on May 16, 2013, at a workplace located at 3726 Towne Crossing Boulevard, Mesquite, TX 75150; where at least one (1) employee was working from an improvised, job-built single-pole scaffold that did not have diagonal bracing in both directions installed across the entire outside face.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339072761.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.