Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MR ROOTER PLUMBING

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MR ROOTER PLUMBING in 31382 INDUSTRIAL PARKWAY, NORTH OLMSTED, OH 44070 (NAICS 238220). OSHA activity number 339074486.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MR Rooter Plumbing — free Get an email when a new federal OSHA severe-injury report for MR Rooter Plumbing is published. One employer, no account, unsubscribe in one click.
Establishment
MR ROOTER PLUMBING
Site address
31382 INDUSTRIAL PARKWAY
City
NORTH OLMSTED
State
OH
ZIP
44070
Mailing
31382 INDUSTRIAL PARKWAY, NORTH OLMSTED, OH 44070
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238220
Employees
75
Ownership type
A

5 citations on file for this inspection.

1910.215 A02

Serious Gravity 1 1 instance 60 exposed
Issued
Aug 29, 2013
Abate by
Sep 19, 2013
Penalty
Initial $1,785 · Current $950 Reduced
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:      The Ryobi 6 inch bench grinder had no guard on the abrasive wheel.
Recent events (2)
  • — I (S) $950
  • — Z (S) $1785

1910.215 B09

Serious Gravity 1 1 instance 60 exposed
Issued
Aug 29, 2013
Abate by
Sep 19, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9):  Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:    The Ryobi 6 inch bench grinder had no adjustable tongue guard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.157 G02

Other-than-serious 1 instance 60 exposed
Issued
Aug 29, 2013
Abate by
Sep 19, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.157(g)(2):  The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage firefighting was not provided to all employees upon initial employment, and at least annually thereafter:     Although portable fire extinguishers were available for employee use, neither initial, nor annual retraining was provided.     Note:  Employer may exercise one of the following options.     1.  Provide portable fire extinguishers as specified in 29 CFR1910.157(c)(1), meet the distribution requirements per 29 CFR1910.157(d) (75' to the nearest extinguisher for Class A fires and 50' to the nearest unit for Class B fires), and provide training and education for all employees in the use of such equipment and the hazards associated with incipient stage firefighting as required in 29 CFR 1910.157(g). The other sections of 29 CFR also apply.     2.  Provide extinguishers as specified in 29 CFR 1910.157(c)(1),designate certain employees to be the only employees authorized to use such equipment and require all other employees to immediately evacuate upon the sounding of the fire alarm, establish this in writing in an emergency action plan as outlined in 29 CFR1910.38(a) and train/educate designated employees per 1910.157(g).Utilizing this option exempts the employer from distribution requirements of 29 CFR 1910.157(d).    3.  Establish a written fire safety policy which requires the immediate and total evacuation of employees from the workplace upon the sounding of a fire alarm signal.  This policy shall include an emergency action plan and a fire prevention plan as specified in 29CFR 1910.38(a) and (b).  Utilizing this option exempts the employer from the requirements of 29 CFR 1910.157 to include the need for providing portable fire equipment unless a specific standard requires that a portable fire extinguisher be provided (such as those requirements in 29 CFR 1910.106/107 related to use/storage of flammable/combustible liquids).  If extinguishers are provided, but not intended for employee use, 29 CFR 1910.157(e) and (f) are still applicable (inspection, maintenance, and testing of equipment).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 60 exposed
Issued
Aug 29, 2013
Abate by
Oct 18, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e) (1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:      Employees work with PVC Cement and Cleaner which contain hazardous chemicals including, but not limited to; MEK and Acetone. No written hazard communication program was developed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 60 exposed
Issued
Aug 29, 2013
Abate by
Sep 19, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employers did not  provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area:    Employees work with PVC Cement and Cleaner which contain hazardous chemicals including, but not limited to; MEK and Acetone. No hazard communication training was provided
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View MR Rooter Plumbing's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339074486.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.