ROCKLAND, MA —
OSHA Inspection: UNIVERSAL WILDE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UNIVERSAL WILDE in 403 VFW DRIVE, ROCKLAND, MA 02370 (NAICS 323119). OSHA activity number 339076549.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIVERSAL WILDE
- Site address
- 403 VFW DRIVE
- City
- ROCKLAND
- State
- MA
- ZIP
- 02370
- Mailing
- 403 VFW DRIVE, ROCKLAND, MA 02370
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323119
- Employees
- 29
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.106 E09 III
- Issued
- Jun 25, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $2,805 · Current $1,403 Reduced
General-duty citation text
29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily: Adjacent to the M300 Press: Rags with combustible residues were in an uncovered waste container.
Recent events (2)
- — I (S) $1402.5
- — Z (S) $2805
1910.219 I02
- Issued
- Jun 25, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $3,300 · Current $1,650 Reduced
General-duty citation text
29 CFR 1910.219(i)(2): Revolving surfaces of shaft coupling(s) were not covered by a safety sleeve: Back side of the M300 Press: The motor coupling of the drop down clutch at the back side of the M300 Press was not guarded.
Recent events (2)
- — I (S) $1650
- — Z (S) $3300
1910.303 G02 I
- Issued
- Jun 25, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $4,400 · Current $2,200 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): Press Dept.: 1) The cover of the control panel of the palletizer was not latched in the closed position to prevent shock or arc flash burns. 2) A cover of the control panel for the Hancho Printing Press was not latched in the closed position to prevent shock or arc flash burns. 3) Covers for control panels at the M300 Press Line were not latched in the closed position to prevent shock or arc flash burns.
Recent events (2)
- — I (S) $2200
- — Z (S) $4400
1910.332 B01
- Issued
- Jun 25, 2013
- Abate by
- Nov 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments: Worksite: The employer did not train printing press employees on electrical safety related work practices.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.335 A01 I
- Issued
- Jun 25, 2013
- Abate by
- Nov 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed: Worksite: The employer did not assess what type of PPE is required for employees entering electrical control panels for printing presses and the palletizer and have not provided employees electrical protective equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Universal Wilde
View Universal Wilde's full OSHA safety record →
More inspections in this industry (NAICS 323119)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339076549.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.