BINGHAMTON, NY —
OSHA Inspection: C&C WELDING CO. INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of C&C WELDING CO. INC. in 15 GRISWOLD STREET, BINGHAMTON, NY 13904 (NAICS 332312). OSHA activity number 339079964.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C&C WELDING CO. INC.
- Site address
- 15 GRISWOLD STREET
- City
- BINGHAMTON
- State
- NY
- ZIP
- 13904
- Mailing
- 15 GRISWOLD STREET, BINGHAMTON, NY 13904
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.157 G02
- Issued
- Jun 21, 2013
- Abate by
- Jul 16, 2013
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a)Throughout the facility, on or about 5/22/13: Training was not provided to employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting. * ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39 which includes the evacuation requirements of 29 CFR 1910.157(b).
Recent events (2)
- — I (S) $0
- — Z (S) $1200
1910.212 A01
- Issued
- Jun 21, 2013
- Abate by
- Jul 6, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a) Miscellaneous Metal Department, on or about 5/22/13: Dayoton 16 1/2 Drill Press was not provided with a chuck and tool guard. b) Fabrication Shop, on or about 5/22/13: GE Belt Grinder Model KK203D96 had unguarded in-going nip points at the end of the belt and the spindle end and nut projection were not guarded.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.213 H01
- Issued
- Jun 21, 2013
- Abate by
- Jul 6, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut: a) Miscellaneous Metal Department, on or about 5/22/13: Craftsman Radial Saw had no lower blade guard on either side of blade.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.243 C01
- Issued
- Jun 21, 2013
- Abate by
- Jul 6, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4): a) Miscellaneous Metal Department, on or about 5/22/13: Makita Hand Grinder being used with no guard.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.178 L04 III
- Issued
- Jun 21, 2013
- Abate by
- Jul 19, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. a)C&C Welding Co. Inc., on or about 5/22/13: The employer had not provided for an evaluation of each powered industrial truck operator at least once every three years. Last training was conducted January 2009.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at C&C Welding CO. INC.
View C&C Welding CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339079964.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.