Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: ADM MILLING COMPANY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ADM MILLING COMPANY in 1120 KING STREET, CHATTANOOGA, TN 37403 (NAICS 311211). OSHA activity number 339081044.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ADM Milling Company for free Get an email when a new federal OSHA severe-injury report for ADM Milling Company is published. One employer, no account, unsubscribe in one click.
Establishment
ADM MILLING COMPANY
Site address
1120 KING STREET
City
CHATTANOOGA
State
TN
ZIP
37403
Mailing
1120 KING STREET, CHATTANOOGA, TN 37403
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311211
Employees
72
Ownership type
Private (A)

4 citations on file for this inspection.

1917.112 C03

Other-than-serious 1 instance 1 exposed
Issued
Sep 30, 2013
Abate by
Feb 15, 2014
Penalty
Initial $2,295 · Current $2,295
29 CFR 1917.112(c)(3): The top surface of guardrails installed after October 3, 1983, was not 42 inches, plus or minus 2 inches high.    a) Crane (Barge Area) - On or about 5/21/13, employees were exposed to fall hazards when crane platform guardrails were not at least 42 inches high. Guardrails have been installed since 1991.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (O) $2295
  • · Z (S) $2295

1910.304 G05

Other-than-serious 1 instance 1 exposed
Issued
Sep 30, 2013
Abate by
Oct 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective.  a)  Crane (Barge Area) - On or about 5/21/13, employees were exposed to shock hazards when extension cord was missing ground prong.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1917.26 D04

Other-than-serious 1 instance 2 exposed
Issued
Sep 30, 2013
Abate by
Oct 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1917.26(d)(4): Stretchers did not have at least four sets of effective patient restraints in operable condition.  a) Barge Facility (Breakroom) - On or about 5/21/13, employees were exposed to shock hazards when a strap was missing from the stretcher.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1917.26 F

Other-than-serious 1 instance 1 exposed
Issued
Sep 30, 2013
Abate by
Oct 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1917.26(f): A US Coast Guard approved 30 inch life ring, with at least 90 feet of line attached, was not available at readily accessible points at each waterside work area where the employees work exposed them to the hazard of drowning.  a) Crane (Barge Area) - On or about 5/21/13, employees were exposed to shock hazards when life ring with 90 feet of line was not made available for the crane barge area.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View ADM Milling Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339081044.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.