Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: XTO ENERGY INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of XTO ENERGY INC in PLATFORM C, NIKISKI, AK 99635 (NAICS 211111). OSHA activity number 339085169.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch XTO Energy INC for free Get an email when a new federal OSHA severe-injury report for XTO Energy INC is published. One employer, no account, unsubscribe in one click.
Establishment
XTO ENERGY INC
Site address
PLATFORM C
City
NIKISKI
State
AK
ZIP
99635
Mailing
52260 WIK ROAD, KENAI, AK 99611
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
211111
Employees
3
Ownership type
Private (A)

5 citations on file for this inspection.

1910.212 B

Other-than-serious 1 instance 2 exposed
Issued
Jun 4, 2013
Abate by
Jul 2, 2013
Penalty
Initial $2,550 · Current $2,550
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving.    XTO Platform C, Welding Shop:  On or about 20 may 2013 and times prior thereto, the Craftsman 20 inch floor drill press was not securely anchored to the floor surface.  This condition exposed employees to a struck by hazard.
Recent events (2)
  • · I (O) $2550
  • · Z (S) $2550

1910.254 D09 III

Other-than-serious 1 instance 2 exposed
Issued
Jun 4, 2013
Abate by
Jun 4, 2013
Penalty
Initial $2,550 · Current $1,989 Reduced
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replaced.      XTO Platform C, A/C Room:  On or about 20 may and times prior thereto, the welding stinger on Lincoln Welder #2 had cut insulation approximately 69 inches from the stinger and taped over with electrical tape.  This condition exposed employees to an electrical shock and burn hazard.
Recent events (2)
  • · I (O) $1989
  • · Z (S) $2550

1910.304 G05

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Jun 4, 2013
Abate by
Jun 4, 2013
Penalty
Initial $2,550 · Current $0 Reduced
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective.  XTO Platform C, Drill rig, dog house:  On or about 20 May 2013 and times prior thereto a 100 foot orange extension cord was missing its ground pin.  This condition exposed employees to an electrical shock and burn hazard.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2550

1910.334 A02 I

Serious Gravity 1 2 instances 2 exposed
Issued
Jun 4, 2013
Abate by
Jul 2, 2013
Penalty
Initial $0 · Current $2,550
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):    Platform C, Welding Shop:  On or about 20 May 2013 and times prior thereto two 120 volt electrical extension cords had broken cover plates.  This condition exposed employees to an electrical shock and burn hazard.
Recent events (2)
  • · I (S) $2550
  • · Z (S) $0

1910.184 D

Other-than-serious 2 instances 1 exposed
Issued
Jun 4, 2013
Abate by
Jul 2, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.184(d): Damaged or defective sling(s) were not immediately removed from service.   XTO Platform C, Upper deck, Sling storage:  On or about 20 may 2013 and times prior thereto a six-foot and three foot nylon strap saturated with oil and grease rendering the slings uninspectable for prior to use inspections.  This condition exposed employees to struck by hazard.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View XTO Energy INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339085169.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.