SAINT ANN, MO ·
OSHA Inspection: AUTOTIRE
Monitoring inspection · Safety discipline
At a glance
On , OSHA opened a monitoring safety inspection of AUTOTIRE in 3840 ADIE ROAD, SAINT ANN, MO 63074 (NAICS 811111). OSHA activity number 339087256.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AUTOTIRE
- Site address
- 3840 ADIE ROAD
- City
- SAINT ANN
- State
- MO
- ZIP
- 63074
- Mailing
- 3840 ADIE ROAD, SAINT ANN, MO 63074
What kind of inspection was it?
- Inspection type
- Monitoring (D)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 7
- Ownership type
- Private (A)
Citations
2 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 26, 2013
- Abate by
- Dec 23, 2013
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee(s) in that employee(s) were exposed to the hazard of being caught-in: On 5/28/2013, employees at Autotire, located at 3840 Adie Road, St. Ann, MO, 63074, were working with automotive lifts in eight different bays. Employees were exposed to hazards such as amputation, laceration, caught in between, and/or being crushed when working with the following automotive lifts where deficiencies were noted: a/ Bay 1 Single post in-ground; could not read placard or name plate. b/ Bay 3 two post in-ground; no name plate indicating the manufacturer name and address, model#, serial #, and lift rated load capacity. c/ Bay 8 Rotary two post above ground, serial # SPOA9-200, was missing a ring on the swivel lock release pin and had a bent ring on another swivel release pin. One method of abatement is to have a qualified inspector perform inspections required by ANSI/ALI ALIOM: 2008, paragraphs 5.6.1 through 5.6.6.5. The lifts in bays 1, 3 & 8 may be abated by having a qualified inspector perform inspections as required by ANSI/ALI ALIOM: 2008, paragraphs 5.6.2.6 and 5.6.2.13. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method.
Recent events (2)
- · I (S) $4410
- · Z (S) $6300
1910.305 G02 III
- Issued
- Nov 26, 2013
- Abate by
- Dec 23, 2013
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that will prevent pull from being directly transmitted to joints or terminal screws. On 5/28/2013, Autotire located at 3840 Adie Road, St. Ann, MO, 63074, had an automotive lift in bay 6. It was a Mohawk two post above ground lift, serial # A5H204, without proper strain relief going to the electrical motor which could cause an electrical shock, electrocution, or fire.
Recent events (2)
- · I (O) $4410
- · Z (S) $6300
More inspections in this industry (NAICS 811111)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339087256.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.