Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BEAVER CREEK WOOD PRODUCTS, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BEAVER CREEK WOOD PRODUCTS, LLC in 1729 BADGER PARKWAY, MARINETTE, WI 54143 (NAICS 321999). OSHA activity number 339092041.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Beaver Creek Wood Products, LLC — free Get an email when a new federal OSHA severe-injury report for Beaver Creek Wood Products, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1729 BADGER PARKWAY
City
MARINETTE
State
WI
ZIP
54143
Mailing
1729 BADGER PARKWAY, MARINETTE, WI 54143
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321999
Employees
3
Ownership type
A

8 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 26, 2013
Abate by
Aug 23, 2013
Penalty
Initial $2,000 · Current $1,600 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    (a)  The employer did not develop procedures for employee(s) who load the red firewood processor conveyor and enter the danger zone to move logs when they came out of place.         ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2000

1910.212 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 26, 2013
Abate by
Aug 23, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by:    (a)  The in-feed conveyor for the firewood processor did not have machine guarding to protect employee(s) from the ingoing nip point created on the bottom of the north end of the blue conveyor.      (b)  Employee(s) who load the red firewood processor conveyor entered the danger zone to move logs when they came out of place, without anything to prevent the conveyor from being operated by the processor operator, potentially striking the employee with a log.        ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A02

Serious Gravity 5 2 instances 3 exposed
Issued
Jul 26, 2013
Abate by
Aug 23, 2013
Penalty
Initial $1,600 · Current $900 Reduced
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible:     (a)  Guarding on the red conveyors for the firewood processor were not affixed to the machine securely, allowing the guard(s) to be knocked off by logs which would then expose employees to the ingoing nip points and pinch points created by the chain and sprockets.          ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $900
  • — Z (S) $1600

1910.305 B01

Other-than-serious 1 instance 3 exposed
Issued
Jul 26, 2013
Abate by
Aug 23, 2013
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1910.305(b)(1): Openings through which conductors enter boxes, cabinets, or fittings were not effectively closed:     (a)  Conduit entering an electrical box on the blue outfeed conveyor for the firewood processor was not effectively closed, exposing the conductors to abrasion and undo strain.          ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (S) $2000

1910.305 B02

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 26, 2013
Abate by
Aug 23, 2013
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.305(b)(2): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:     (a)  An electrical outlet that a fan was plugged into did not have a cover to prevent debris from entering the outlet box.         ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

1910.305 G02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 26, 2013
Penalty
Initial $1,700 · Current $800 Reduced
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used in continuous lengths without splice or tap:     (a)  A flexible cord powering an electric fan was spliced at the fan end where the capacitor for the fan was removed and the wires were spliced together not maintaining the same insulation and outer sheath characteristics.           NO ABATEMENT CERTIFICATION OR DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $800
  • — Z (S) $1700

1910.305 G02 III

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 26, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:   (a)  A flexible cord for an electric fan was not connected to the outlet so that strain relief was provided to prevent the insulation from being pulled back from the male plug end, which resulted in the conductors being exposed.       NO ABATEMENT CERTIFICATION OR DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.334 A02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 26, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service:     (a)  An electrical fan that exposed employee(s) to potential electrical shock was not removed from service with the splicing of a flexible wire and a plug end with the insulation pulled back revealing the conductors.       NO ABATEMENT CERTIFICATION OR DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Beaver Creek Wood Products, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339092041.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.