Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: FULL SERVICE CONTRACTING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FULL SERVICE CONTRACTING, INC. in 340 PENINSULA BLVD., HEMPSTEAD, NY 11550 (NAICS 236220). OSHA activity number 339093346.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Full Service Contracting, INC. for free Get an email when a new federal OSHA severe-injury report for Full Service Contracting, INC. is published. One employer, no account, unsubscribe in one click.
Site address
340 PENINSULA BLVD.
City
HEMPSTEAD
State
NY
ZIP
11550
Mailing
510 EAGLE AVENUE, WEST HEMPSTEAD, NY 11552
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
20
Ownership type
A

4 citations on file for this inspection.

1926.403 B02

Serious Gravity 5 1 instance 10 exposed
Issued
Jun 10, 2013
Abate by
Jun 14, 2013
Penalty
Initial $1,600 · Current $960 Reduced
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:     a) Worksite, East side - Employees were using a 4 inch, square, steel quad junction box to power a circular saw, and charge a battery. The 4 inch steel double gang box was not mounted in accordance with the manufacturers instructions; on or about 05/31/13.     Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • · I (S) $960
  • · Z (S) $1600

1926.405 B02

Serious Gravity 5 1 instance 10 exposed
Issued
Jun 10, 2013
Abate by
Jun 26, 2013
Penalty
Initial $1,600 · Current $960 Reduced
29 CFR 1926.405(b)(2): In energized installations, each outlet box did not have a cover, faceplate, or fixture canopy:    a) Interior, Southeast Corner - Employees were using an outlet to power items such as but not limited to an extension cord, powering a circular saw and a battery charger. The outlet did not have a faceplate on it; on or about 05/31/13.     Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • · I (S) $960
  • · Z (S) $1600

1926.451 G01

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 10, 2013
Abate by
Jun 26, 2013
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level.    a) Worksite West side - Employees were installing a parapet approximately 14 feet above the ground from an elevated work platform. The employees did not have fall protection; on or about 05/31/13.     Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • · I (S) $1680
  • · Z (S) $2800

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 10, 2013
Abate by
Jun 10, 2013
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:    a) Worksite, West side - Employees were using and unsecured ladder to gain access to an elevated work platform. The ladder side rails were approximately 6 inches above the upper landing; on or about 05/31/13.    Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

View Full Service Contracting, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339093346.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.