Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,249Inspections Most recent open 2026-08-20 Last loaded 2026-08-24

OSHA Inspection: EARTH HARVEST MILLS, INC.

Follow-up inspection · Health discipline

On , OSHA opened a follow-up health inspection of EARTH HARVEST MILLS, INC. in 500 NORTH STREET WEST, HARVEY, ND 58341 (NAICS 311211). OSHA activity number 339095952.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Earth Harvest Mills, INC. for free Get an email when a new federal OSHA severe-injury report for Earth Harvest Mills, INC. is published. One employer, no account, unsubscribe in one click.
Site address
500 NORTH STREET WEST
City
HARVEY
State
ND
ZIP
58341
Mailing
500 NORTH STREET WEST, HARVEY, ND 58341
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311211
Employees
25
Ownership type
Private (A)

6 citations on file for this inspection.

1910.23 C01

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 19, 2013
Abate by
Nov 22, 2013
Penalty
Initial $2,200 · Current $2,200
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:  (a) On or about May 30, 2013, and at times prior, for the employees accessing and/or traveling/working beneath the platform on top of the milling machine, approximately nine feet above the ground, in order to perform maintenance and repair or to change out screens on the milling machine in Building 9, the Gluten-free Milling Room at 500 North Street West in Harvey, North Dakota
Recent events (1)
  • · Z (S) $2200

1910.219 C02 I

Serious Gravity 10 1 instance 7 exposed
Issued
Nov 19, 2013
Abate by
Dec 6, 2013
Penalty
Initial $3,080 · Current $3,080
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  (a) On or about May 30, 2013, and at times prior, for the employees who operated the blenders where approximately three inches of a rotating shaft exposed employees to caught-in and amputation hazards in Building 2, the Gluten-free Packaging Room at 500 North Street West in Harvey, North Dakota.
Recent events (1)
  • · Z (S) $3080

1910.219 D01

Serious Gravity 10 2 instances 7 exposed
Issued
Nov 19, 2013
Abate by
Dec 6, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  (a) On or about May 30, 2013, and at times prior, for the employees who operated the blenders where approximately six inches of access to the pulleys and chain, due to insufficient guarding on the back, exposed employees to caught-in and amputation hazards in Building 2, the Gluten-free Packaging Room at 500 North Street West in Harvey, North Dakota.  (b) On or about May 30, 2013, and at times prior, for the employees who accessed the platform on top of the milling machine, approximately nine feet above the ground, in order to perform maintenance and repair or to change out screens on the milling machine in Building 9, the Gluten-free Milling Room at 500 North Street West in Harvey, North Dakota.
Recent events (1)
  • · Z (S) $0

1910.219 E02 IV

Serious Gravity 10 2 instances 7 exposed
Issued
Nov 19, 2013
Abate by
Dec 6, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.219(e)(2)(iv): Overhead chain and link belt drives, governed by the same rules as overhead horizontal belts, were not enclosed by guard(s) in the same manner as belts conforming to the requirements specified at 29 CFR 1910.219(m) and (o):    (a) On or about May 30, 2013, and at times prior, for the employees who operated the blenders where approximately six inches of access to the pulleys and chain, due to insufficient guarding on the back, exposed employees to caught-in and amputation hazards in Building 2, the Gluten-free Packaging Room at 500 North Street West in Harvey, North Dakota.  (b) On or about May 30, 2013, and at times prior, for the employees who accessed the platform on top of the milling machine, approximately nine feet above the ground, in order to perform maintenance and repair or to change out screens on the milling machine in Building 9, the Gluten-free Milling Room at 500 North Street West in Harvey, North Dakota.
Recent events (1)
  • · Z (S) $0

1910.305 B01 II

Repeat Gravity 5 1 instance 10 exposed
Issued
Nov 19, 2013
Abate by
Nov 22, 2013
Penalty
Initial $4,400 · Current $4,400
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:  (a) On or about May 30, 2013, and at times prior, for the employees accessing the 480-volt breaker panels in the Gluten-free Electrical Room at 500 North Street West in Harvey, North Dakota.  Note: This company was previously cited for a violation of this Occupational Safety and Health standard or its equivalent which was contained in OSHA Inspection Number 314777905, Citation 1, Item 2A, and was affirmed as a final order on February 11, 2013, with respect to a workplace located at 500 North Street West in Harvey, North Dakota.
Recent events (1)
  • · Z (R) $4400

1910.305 G01 IV A

Other-than-serious 1 instance 5 exposed
Issued
Nov 19, 2013
Abate by
Dec 6, 2013
Penalty
Initial $440 · Current $440
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  (a) On or about May 30, 2013, and at times prior, for the employees working in Building 9, the Gluten-Free Milling Room, where an extension cord was used to provide power for a printer on the Doboy Packaging Machinery Inc. bag-filling and bag-sealing machine, Model SB-MD Conveyor, Serial Number 00-22602, that was connected to a permanent power supply at Dakota Prairie Organic Flour Company located at 500 North Street West in Harvey, North Dakota.
Recent events (1)
  • · Z (O) $440

View Earth Harvest Mills, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339095952.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.