MIAMI, FL —
OSHA Inspection: CONCEPT ELEVATOR GROUP LLC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of CONCEPT ELEVATOR GROUP LLC in 8027 NW 71 STREET, MIAMI, FL 33166 (NAICS 333921). OSHA activity number 339103657.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONCEPT ELEVATOR GROUP LLC
- Site address
- 8027 NW 71 STREET
- City
- MIAMI
- State
- FL
- ZIP
- 33166
- Mailing
- 8027 NW 71 STREET, MIAMI, FL 33166
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333921
- Employees
- 51
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 14, 2013
- Abate by
- Aug 28, 2013
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about June 6, 2013, at the above addressed jobsite, an employee was exposed to an amputation hazard while working with a chop saw (SCWC 0041) that lacked point of operation guarding. b. On or about June 6, 2013, at the above addressed jobsite, an employee was exposed to an amputation hazard while working with a drill press (EE1 Portugal, Model DG-2, Serial number 1-9004) that lacked point of operation guarding.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.212 B
- Issued
- Aug 14, 2013
- Penalty
- Initial $1,785 · Current $893 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a. On or about June 6, 2013, at the above addressed jobsite, an employee was exposed to a struck by hazard while working with a drill press (EE1 Portugal, Model DG-2, Serial number 1-9004) that was not anchored.
Recent events (2)
- — I (S) $892.5
- — Z (S) $1785
1910.243 C01
- Issued
- Aug 14, 2013
- Abate by
- Aug 22, 2013
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4): a. On or about June 6, 2013, at the above addressed worksite, an employee was exposed to an amputation hazard while working with an angle grinder (Hitachi #C67552) that lacked a guard.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.303 C03 I
- Issued
- Aug 14, 2013
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.303(c)(3)(i): All splices and joints and the free ends of the conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose: a. On or about June 6, 2013, at the above addressed worksite, an employee was exposed to an electrical hazard while working in close proximity of a spliced cord which was part of a food heating cabinet that was not properly insulated.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.305 G02 III
- Issued
- Aug 14, 2013
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a. On or about June 6, 2013, at the above addressed worksite, an employee was exposed to an electrical hazard while working with an extension cord that lacked strain relief at the female end attachment plug.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
More inspections at Concept Elevator Group LLC
View Concept Elevator Group LLC's full OSHA safety record →
More inspections in this industry (NAICS 333921)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339103657.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.