OSHA Inspection: LENAPE MOLD & TOOL CO., INC.

Issued

2013-07-03 00:00:00

Abate by

2013-07-30 00:00:00

Penalty

Initial $1200.00 · Current $720.00 Reduced

General-duty citation text

29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment:     a) Shop - The wearing of safety glasses was not required when employees used production equipment such as, but not limited to lathes, grinders, and compressed air. On or about 6/11/13.     NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2013-07-03 00:00:00

Abate by

2013-08-30 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:     a) Shop - A site specific lockout program was not developed for production equipment such as, but not limited to the Haas CNC milling machines, the Daewoo CNC milling machines and lathe, drill presses, and surface grinders. On or about 6/11/13.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2013-07-03 00:00:00

Abate by

2013-07-30 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) Shop - There was no guard over the grinding wheel on the Harig 610 surface grinder. On or about 6/11/13.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2013-07-03 00:00:00

Penalty

Initial $1600.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:     a) Shop - There was no tongue guard on the right grinding wheel of the Baldor bench grinder (Spec # 910-163-4, serial number XO511037064), and the tongue guard on the left grinding wheel was adjusted to approximately 1/2 inch. On or about 6/11/13.

Issued

2013-07-03 00:00:00

Abate by

2013-07-30 00:00:00

Penalty

Initial $1200.00 · Current $720.00 Reduced

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:    a)   Shop - The compressed air supplying the air hoses used by employees to clean their work area was measured at approximately 100 psi. On or about 6/11/13.     NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2013-07-03 00:00:00

Abate by

2013-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a) Shop - A site specific chemical hazard communication program was not developed. Employees used chemicals such as, but not limited to coolants, lubricants, acetone, WD-40, and Safety Kleen parts cleaner (mineral spirits). On or about 6/11/13.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2013-07-03 00:00:00

Abate by

2013-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):     a) Shop - Material Safety Data Sheets were not maintained for chemical products including, but not limited to coolants, lubricants, acetone, WD-40, and Safety Kleen parts cleaner (mineral spirits). On or about 6/11/13.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2013-07-03 00:00:00

Abate by

2013-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) Shop - Training in the hazards of chemicals used in the shop was not provided for employees who used chemicals such as, but not limited to coolants, lubricants, acetone, WD-40, and Safety Kleen parts cleaner (mineral spirits). On or about 6/11/13.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.