Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: LGG CARPENTRY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LGG CARPENTRY in 12 QUICKWAY ROAD, MONROE, NY 10950 (NAICS 238130). OSHA activity number 339112021.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch LGG Carpentry for free Get an email when a new federal OSHA severe-injury report for LGG Carpentry is published. One employer, no account, unsubscribe in one click.
Establishment
LGG CARPENTRY
Site address
12 QUICKWAY ROAD
City
MONROE
State
NY
ZIP
10950
Mailing
210 ASTOR STREET, NEWARK, NJ 07104
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

9 citations on file for this inspection.

1926.451 A06

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design:  a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold that had not been designed by a qualified person or constructed in accordance with a safe design.
Recent events (1)
  • · Z (S) $2400

1926.451 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold that was not fully planked, having 1-2 planks missing.
Recent events (1)
  • · Z (S) $0

1926.451 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used:   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold using the cross bracing as the means of access and egress.
Recent events (1)
  • · Z (S) $0

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 28, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold platform 20'8" from the ground with no fall protection in place where the work was being performed.
Recent events (1)
  • · Z (S) $0

1926.451 G04 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(4)(iv): Midrails were not installed at a height approximately midway between the top edge of the guardrail system and the platform surface:  a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold 20'8" from the ground that had no midrails installed.
Recent events (1)
  • · Z (S) $0

1926.451 F03

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold that had not been inspected by a competant person at any time.
Recent events (1)
  • · Z (S) $2400

1926.451 F07

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold that had not been erected by trained/experienced employees or under the supervision of a competant person.
Recent events (1)
  • · Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold 20'8" from the ground while not having any training in the recognition of the hazards associated with the scaffold.
Recent events (1)
  • · Z (S) $1600

1926.454 B

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 21, 2013
Abate by
Aug 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.454(b): The employer did not have each employee involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question:   a)  On or about April 11, 2013 and at times prior thereto at the job site; employees were working from a scaffold 20'8" from the ground that had not been erected, maintained, or inspected by a trained employee.
Recent events (1)
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339112021.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.