CHICAGO, IL ·
OSHA Inspection: BEARSE MANUFACTURING CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BEARSE MANUFACTURING CO. in 3815 W. CORTLAND, CHICAGO, IL 60647 (NAICS 314911). OSHA activity number 339115842.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEARSE MANUFACTURING CO.
- Site address
- 3815 W. CORTLAND
- City
- CHICAGO
- State
- IL
- ZIP
- 60647
- Mailing
- 3815 W. CORTLAND, CHICAGO, IL 60647
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314911
- Employees
- 70
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 19, 2013
- Abate by
- Jul 16, 2013
- Penalty
- Initial $2,625 · Current $1,575 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, and rotating parts (a) Utica Slitter Area - The unused portion of the Slitter saw blade was not guarded. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- · I (S) $1575
- · Z (S) $2625
1910.219 D01
- Issued
- Jun 19, 2013
- Abate by
- Jul 16, 2013
- Penalty
- Initial $2,625 · Current $1,575 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Utica Slitter Area - Pulley(s) with part(s) seven feet or less from the floor on the Utica Slitter machine were not guarded. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- · I (S) $1575
- · Z (S) $2625
1910.219 E03 I
- Issued
- Jun 19, 2013
- Abate by
- Jul 16, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o) (a) Utica Slitter Area - The Utica Slitter machine had an inclined belt that was not enclosed by a guard. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 F03
- Issued
- Jun 19, 2013
- Abate by
- Jul 16, 2013
- Penalty
- Initial $2,625 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven feet or less above floors or platforms were not enclosed: (a)Utica Slitter Machine Area - The Utica Slitter machine had sprocket wheels and a chain seven feet or less above the floor that were not enclosed. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- · I (S) $0
- · Z (S) $2625
More inspections at Bearse Manufacturing CO.
View Bearse Manufacturing CO.'s full OSHA safety record →
More inspections in this industry (NAICS 314911)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339115842.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.