NEW PLYMOUTH, ID —
OSHA Inspection: BEAR MOUNTAIN MACHINE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BEAR MOUNTAIN MACHINE, INC. in 201 E IDAHO, NEW PLYMOUTH, ID 83655 (NAICS 332710). OSHA activity number 339118028.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEAR MOUNTAIN MACHINE, INC.
- Site address
- 201 E IDAHO
- City
- NEW PLYMOUTH
- State
- ID
- ZIP
- 83655
- Mailing
- P. O. BOX 40, NEW PLYMOUTH, ID 83655
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 14
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 15, 2013
- Abate by
- Sep 11, 2013
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Maine shop area: On or about June 13, 2013 and at times prior thereto, the nip points and spindle of the Baldor belt sanding machine were properly guarded. Note: Abatement certification is required.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.157 E02
- Issued
- Aug 15, 2013
- Abate by
- Sep 11, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: (a) Throughout the shop: On or about June 13, 2013 and at times prior thereto, portable fire extinguishers had not been visually inspected on a monthly basis. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01 II
- Issued
- Aug 15, 2013
- Abate by
- Sep 11, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: (a) Main shop area: On or about June 13, 2013 and at time prior thereto, the area in front of the electrical panels, which power the shop and equipment, was inaccessible due to storage of various items. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F05
- Issued
- Aug 15, 2013
- Abate by
- Sep 11, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: (a) Main Shop Area: On or about June 13, 2013 and at times prior thereto, a five gallon bucket containing Xtreme Cut 250C by QualiChem was not labeled with it's contents. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332710)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339118028.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.