STATEN ISLAND, NY ·
OSHA Inspection: TECH PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TECH PRODUCTS, INC. in 105 WILLOW AVE., STATEN ISLAND, NY 10305 (NAICS 332999). OSHA activity number 339123002.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TECH PRODUCTS, INC.
- Site address
- 105 WILLOW AVE.
- City
- STATEN ISLAND
- State
- NY
- ZIP
- 10305
- Mailing
- 105 WILLOW AVE., STATEN ISLAND, NY 10305
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 30
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Sep 24, 2013
- Penalty
- Initial $2,100 · Current $2,100
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a- Production Area, exit route near the Lamba press - The exit route was obstructed by a spool of metal product which was being fed into the Lamba press. Condition noted on or about 6/18/13.
Recent events (1)
- · Z (S) $2100
1910.212 A01
- Issued
- Sep 24, 2013
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by moving parts: a- Production Area - The following press was missing a guards in the back of the machines: 1- Clearing Press - Guard for the back part of the press was removed and was observed lying on the floor. Condition noted on or about 7/24/13.
Recent events (1)
- · Z (S) $2800
1910.217 C02 I A
- Issued
- Sep 24, 2013
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s) a- Production Area - The smaller Rouselle power presses had inadequate point of operation guards as an employee could place their hands over the existing guards as well as into the point of operation. Condition noted on or about 6/18/13.
Recent events (1)
- · Z (S) $3500
1910.219 B01
- Issued
- Sep 24, 2013
- Abate by
- Oct 27, 2013
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv): a- Production Area, Rouselle 40 ton press "A" - The flywheel on the press was not completely guarded. Condition noted on or about 618/13.
Recent events (1)
- · Z (S) $3500
1910.305 B02 I
- Issued
- Sep 24, 2013
- Abate by
- Oct 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a- Production Area - The electric housing for the Rouselle 40 ton press was missing its cover. Condition noted on or about 6/18/13.
Recent events (1)
- · Z (O) $0
More inspections at Tech Products, INC.
View Tech Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339123002.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.