BARTLESVILLE, OK · 2013-06-12 00:00:00

OSHA Inspection: BOB CHANEY STEEL CONSTRUCTION, LLC

Planned inspection · Safety discipline

At a glance

On 2013-06-12 00:00:00, OSHA opened a planned safety inspection of BOB CHANEY STEEL CONSTRUCTION, LLC in 1901 SE WASHINGTON, BARTLESVILLE, OK 74006 (NAICS 238120). OSHA activity number 339126161.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch BOB Chaney Steel Construction, LLC for free Get an email when a new federal OSHA severe-injury report for BOB Chaney Steel Construction, LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: BOB CHANEY STEEL CONSTRUCTION, LLC
Site address: 1901 SE WASHINGTON
City: BARTLESVILLE
State: OK
ZIP: 74006
Mailing: 398110 W 1300 RD, DEWEY, OK 74029

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: B

When did the case open and close?

Opened: 2013-06-12 00:00:00
Closing conference: 2013-06-13 00:00:00
Case closed: 2013-09-12 00:00:00
Last modified: 2026-08-01 00:00:00
Data loaded: 2026-08-02 00:19:52

Establishment context

NAICS code: 238120
Employees: 5
Ownership type: A

Citations

4 citations on file for this inspection.

1926.100 A

Serious Gravity 1 5 instances 5 exposed

Issued: Aug 28, 2013
Penalty: Initial $1,200 · Current $720 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:  Service intake bay:  On or about June 12, 2013, employees constructing a metal building were not wearing hard hats.  This exposed them to the hazard of being struck on the head by materials and tools.

Recent events (2)

2013-09-09 00:00:00 · I (S) $720
2013-08-28 00:00:00 · Z (S) $1200

1926.451 C02 IV

Serious Gravity 5 1 instance 2 exposed

Issued: Aug 28, 2013
Abate by: Aug 30, 2013
Penalty: Initial $1,600 · Current $960 Reduced

General-duty citation text

29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:  Service intake bay:  On or about June 12, 2013, employees constructing a metal building worked from a forklift support platform, the forklift was not designed to support the platform.  This exposed the employees to the hazards of falling and being stuck by the platform in the event of forklift or platform failure.

Recent events (2)

2013-09-09 00:00:00 · I (S) $960
2013-08-28 00:00:00 · Z (S) $1600

1926.602 C01 II

Serious Gravity 5 1 instance 2 exposed

Issued: Aug 28, 2013
Abate by: Aug 30, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval:    Service intake bay:  On or about June 12, 2013, employees constructing a metal building worked from a forklift support platform, no manufacturer approval to use the platform was obtained.  This exposed the employees to the hazards of falling and being stuck by the platform in the event of forklift or platform failure.

Recent events (2)

2013-09-09 00:00:00 · I (S) $0
2013-08-28 00:00:00 · Z (S) $0

1926.760 A01

Serious Gravity 10 1 instance 4 exposed

Issued: Aug 28, 2013
Abate by: Aug 30, 2013
Penalty: Initial $2,800 · Current $1,680 Reduced

General-duty citation text

29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who was on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:    Service intake bay:  On or about June 12, 2013, and times prior to, employees constructing a metal building worked on the roof without any fall protection.  This exposed them to the hazard of falling over 15 feet.

Recent events (2)

2013-09-09 00:00:00 · I (S) $1680
2013-08-28 00:00:00 · Z (S) $2800

More inspections in this industry (NAICS 238120)

Jul 30, 2026 Barone Steel Fabricators INC. · NEW YORK, NY Jul 29, 2026 Prestige Steel & Supply, INC. · LINCOLN PARK, MI Jul 28, 2026 Sunset Steel Erectors, INC. · HENDERSON, NV Jul 27, 2026 EYD Metal Building · OMAHA, NE Jul 23, 2026 Vulcan Fabricated Metals, INC. · HOMEWOOD, AL

More inspections in OK

Jul 22, 2026 Asplundh Tree Expert LLC · MUSKOGEE, OK Jul 22, 2026 Atwood Distributing, LP · OWASSO, OK Jul 20, 2026 Napco Precast · BROKEN ARROW, OK Jul 15, 2026 LA Union 7 LLC · TULSA, OK Jul 13, 2026 Latshaw Drilling Company · STILLWATER, OK

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339126161.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.