PAGO PAGO, AS —
OSHA Inspection: J & P CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J & P CORPORATION in ROUTE 1, NU'ULI, PAGO PAGO, AS 96799 (NAICS 424410). OSHA activity number 339129850.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J & P CORPORATION
- Site address
- ROUTE 1, NU'ULI
- City
- PAGO PAGO
- State
- AS
- ZIP
- 96799
- Mailing
- P.O. BOX 803, PAGO PAGO, AS 96799
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424410
- Employees
- 5
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.37 A03
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $1,200 · Current $900 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: This violation was observed on June 13, 2013; where exit routes were cluttered with products and obstructed the exit routes.
Recent events (2)
- — I (S) $900
- — Z (S) $1200
1910.37 B02
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": This violation was observed on June 13, 2013; in the managers office where the door used as part of the emergency exit route was not marked by a sign reading "Exit"
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $1,600 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: This violation was observed on June 13, 2013; where the band saw used to cut meat did not have a point of operation guard on the exposed blade.
Recent events (2)
- — I (S) $1200
- — Z (S) $1600
1910.305 C04
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $1,600 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.305(c)(4): Faceplates for flush-mounted snap switches. Snap switches mounted in boxes shall have faceplates installed so as to completely cover the opening and seat against the finished surface: This violation was discovered on June 13, 2013; where employees were not protected from contacting energized parts while using the uncovered light switch.
Recent events (2)
- — I (S) $1200
- — Z (S) $1600
1910.305 D02
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(d)(2): Panelboard enclosures. Panelboards shall be mounted in cabinets, cutout boxes, or enclosures designed for the purpose and shall be dead front. However, panelboards other than the dead front externally-operable type are permitted where accessible only to qualified persons: This violation was observed on June 13, 2013; where the two panelboards were not fully enclosed with dead front panels.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 J01 I
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles located had live parts normally exposed to employee contact: This violation was observed on June 13, 2013; where at least one energized receptacle was not enclosed to prevent employees from contacting energized electrical parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 II
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $1,600 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: This violation was observed on June 13, 2013; where an orange flexible cord was spliced into a grey flexible cord.
Recent events (2)
- — I (S) $1200
- — Z (S) $1600
1910.305 G01 IV C
- Issued
- Jul 24, 2013
- Abate by
- Aug 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(C): Where run through doorways, windows, or similar openings: This violation was observed on June 13, 2013; where an orange flexible cord ran through a l door.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at J & P Corporation
View J & P Corporation's full OSHA safety record →
More inspections in this industry (NAICS 424410)
More inspections in AS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339129850.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.