Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: 611 METALS RECYCLING

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of 611 METALS RECYCLING in 6776 EASTON ROAD, PIPERSVILLE, PA 18947 (NAICS 423930). OSHA activity number 339149833.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch 611 Metals Recycling for free Get an email when a new federal OSHA severe-injury report for 611 Metals Recycling is published. One employer, no account, unsubscribe in one click.
Site address
6776 EASTON ROAD
City
PIPERSVILLE
State
PA
ZIP
18947
Mailing
6776 EASTON ROAD, PIPERSVILLE, PA 18947
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
14
Ownership type
A

6 citations on file for this inspection.

1910.178 L05

Serious Gravity 1 1 instance 14 exposed
Issued
Aug 20, 2013
Abate by
Sep 22, 2013
Penalty
Initial $1,200 · Current $900 Reduced
29 CFR 1910.178(l)(5): The employer did not evaluate the competency of the operator who had previously received training appropriate to the truck and working conditions encountered.    a)  Throughout Work Area - employees who had previously received training did not have an evaluation performed by their new employer to ensure their competency with relation to their assigned forklifts and working conditions, on or about 6/24/13.
Recent events (2)
  • · I (S) $900
  • · Z (S) $1200

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 20, 2013
Abate by
Sep 7, 2013
Penalty
Initial $2,000 · Current $1,500 Reduced
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by point of operation:  (a)  Prep Room - a baler is being operated without its door guard, exposing employees to potential amputation injury while it is in operation, on or about 6/24/13.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $2000

1910.1200 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 20, 2013
Abate by
Sep 7, 2013
Penalty
Initial $2,000 · Current $1,500 Reduced

Hazardous substances 0320

29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):  a)  Throughout Work Area - A hazard communication program had not been developed where employees are working with various chemicals that had been stored in old 55 gallon drums including, but not limited to Versagel and welding gases, on or about 6/21/13.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $2000

1910.1200 G08

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 20, 2013
Abate by
Sep 7, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 0320

29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace:  a)  Throughout Work Area - Material Safety Data Sheets were not being maintained for each hazardous chemical in the facility, on or about 6/21/13.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 20, 2013
Abate by
Sep 7, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 0320

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a)  Throughout Work Area - The employees were not being trained on the various hazards associated with the chemicals being used in the workplace, on or about 6/21/13.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.303 G01 I B

Other-than-serious 1 instance 1 exposed
Issued
Aug 20, 2013
Abate by
Sep 22, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(g)(1)(i)(B): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of the working space in front of electrical equipment was less than the width of the equipment or 762 mm (30 inches), whichever was greater :  a)  Prep Room - The electrical panel box was blocked by a shear, preventing access in the event of an emergency, on or about 6/24/13.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339149833.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.