Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: UNITED STEEL PRODUCTS

Fatality or catastrophe inspection · Safety discipline

On , OSHA opened a fatality or catastrophe safety inspection of UNITED STEEL PRODUCTS in 11910 62ND STREET NORTH, LARGO, FL 33773 (NAICS 332312). OSHA activity number 339151201.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch United Steel Products for free Get an email when a new federal OSHA severe-injury report for United Steel Products is published. One employer, no account, unsubscribe in one click.
Site address
11910 62ND STREET NORTH
City
LARGO
State
FL
ZIP
33773
Mailing
11910 62ND STREET NORTH, LARGO, FL 33773
Inspection type
Fatality or catastrophe (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Last modified
Data loaded
NAICS code
332312
Employees
30
Ownership type
Private (A)

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 3 exposed
Issued
Dec 20, 2013
Abate by
Dec 31, 2013
Penalty
Initial $7,000 · Current $7,000
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck-by hazard while offloading vertically loaded steel coils with weights greater than 4000 pounds that were insufficiently cribbed and unsafely positioned on the flatbed of a trailer.  a. On or about 06/25/2013, steel coil offload area - employees were exposed to struck-by and caught-in hazards when using a forklift to offload vertically loaded steel coils with weights greater than 4000 pounds from a flatbed trailer, which were insufficiently cribbed and unsafely postioned.
Recent events (2)
  • · C (S) $7000
  • · Z (S) $7000

1910.106 E09 III

Serious Gravity 1 1 instance 20 exposed
Issued
Dec 20, 2013
Abate by
Dec 31, 2013
Penalty
Initial $3,000 · Current $3,000
29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily:  a. On or about 06/25/2013, press room #2 - the container used for the disposal of flammable waste material such as WD-40, CRC Brakleen brake parts cleaner and other combustible products was not covered.
Recent events (2)
  • · C (S) $3000
  • · Z (S) $3000

1910.212 A01

Serious Gravity 1 1 instance 5 exposed
Issued
Dec 20, 2013
Abate by
Jan 8, 2014
Penalty
Initial $3,000 · Current $3,000
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. On or about 06/25/2013, press room # 2 - pinch points on powered label conveyors were not guarded.
Recent events (2)
  • · C (S) $3000
  • · Z (S) $3000

1910.303 B02

Other-than-serious 1 instance 5 exposed
Issued
Dec 20, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:   a. On or about 06/25/2013, press room # 2 - the non-metallic sheath cable used to energize a receptacle was not enclosed in conduit.
Recent events (2)
  • · C (O) $0
  • · Z (O) $0

1910.305 G02 II

Other-than-serious 1 instance 5 exposed
Issued
Dec 20, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used in continuous lengths without splice or tap:   a. On or about 06/25/2013, press room #2 - the flexible cord connected to the pedal switch on press #18 was repaired with electrical tape.
Recent events (2)
  • · C (O) $0
  • · Z (O) $0

View United Steel Products's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339151201.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.