OSHA Inspection: CAMERON MACHINE SHOP, INC.

Issued

2013-10-30 00:00:00

Abate by

2013-11-19 00:00:00

Penalty

Initial $3500.00 · Current $1750.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    This violation occurred at a workplace located at 404 N. Bowser Road, Richardson, Texas; where the point of operation to a Hwacheon engine lathe model HL-580 was not guarded.

Issued

2013-10-30 00:00:00

Abate by

2013-11-19 00:00:00

Penalty

Initial $3500.00 · Current $1750.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rests to support offhand grinding work; or work rests on grinding machinery was not designed to be adjustable to compensate for wheel wear:    This violation occurred at a workplace located at 404 N. Bowser Road, Richardson, Texas:    1) A Central Machinery bench grinder was not provided with a work rest;    2) A Queen City Machine Tool Co. floor stand grinder was not provided with an adjustable work rest;    3) A Porter Cable Machine Co. floor stand grinder was not provided with an adjustable work rest.

Issued

2013-10-30 00:00:00

Abate by

2013-11-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:   This violation occurred at a workplace located at 404 N. Bowser Road, Richardson, Texas:  1) A Central Machinery bench grinder;   2) A Queen City Machine Tool Co. floor stand grinder;  3) A Porter Cable Machine Co. floor stand grinder.

Issued

2013-10-30 00:00:00

Abate by

2013-11-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:  This violation occurred at a workplace located at 404 N. Bowser Road, Richardson, Texas; where the flexible cord to a Central Machinery bench grinder was missing the ground pin.