Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JASON LENT

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of JASON LENT in 7920 N SOMMER ST, PEORIA, IL 61615 (NAICS 336322). OSHA activity number 339158438.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jason Lent — free Get an email when a new federal OSHA severe-injury report for Jason Lent is published. One employer, no account, unsubscribe in one click.
Establishment
JASON LENT
Site address
7920 N SOMMER ST
City
PEORIA
State
IL
ZIP
61615
Mailing
7920 N SOMMER ST, PEORIA, IL 61615
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336322
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 21, 2013
Abate by
Sep 24, 2013
Penalty
Initial $1,600 · Current $1,120 Reduced

Hazardous substances 1591

29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):     Employees used soldering flux and lead-containing solder while manufacturing electrical harnesses and the employer had not developed a written hazard communication program that included a master list of chemicals and methods for non-routine tasks.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

1910.1200 G08

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 21, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 1591

29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s)    Employees used soldering flux and lead-containing solder while manufacturing electrical harnesses and the employer had not maintain and make accessible copies of the safety data sheets for each hazardous chemical.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 21, 2013
Abate by
Sep 17, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 1591

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  Employees used soldering flux and lead-containing solder while manufacturing electrical harnesses and the employer had not provided information and training on each hazardous chemical.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1025 D02

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 21, 2013
Abate by
Oct 18, 2013
Penalty
Initial $1,600 · Current $1,120 Reduced

Hazardous substances 1591

29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level:     Employees used soldering flux and lead-containing solder while manufacturing electrical harnesses and the employer had not completed an initial determination of any employee exposure to lead.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

1910.1025 L01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 21, 2013
Abate by
Oct 18, 2013
Penalty
Initial $1,600 · Current $0 Reduced

Hazardous substances 1591

29 CFR 1910.1025(l)(1)(i): Employee(s) working in an area where there is potential exposure to airborne lead at any level were not informed of the content of Appendices A and B of 29 CFR 1910.1025:    Employees used soldering flux and lead-containing solder while manufacturing electrical harnesses and the employer had not provided information and training to employees with potential lead exposure.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1600

View Jason Lent's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339158438.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.