POCATELLO, ID ·
OSHA Inspection: SAMS GUN SHOP, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of SAMS GUN SHOP, INC. in 1822 N. MAIN ST., POCATELLO, ID 83201 (NAICS 451110). OSHA activity number 339159964.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAMS GUN SHOP, INC.
- Site address
- 1822 N. MAIN ST.
- City
- POCATELLO
- State
- ID
- ZIP
- 83201
- Mailing
- 1822 N. MAIN ST., POCATELLO, ID 83201
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 451110
- Employees
- 3
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Nov 15, 2013
- Abate by
- Jan 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) Gun shop & range: On or about June 24, 2013 and at times prior thereto, where an employee exposed to lead was required to wear a half face elastomeric respirator, the employer did not have a written respiratory protection program implemented at the workplace. NOTE: Abatement certification is required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.134 E01
- Issued
- Nov 15, 2013
- Abate by
- Jan 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) Gun shop & range: On or about June 24, 2013 and at times prior thereto, an employee required to wear a half face elastomeric respirator had not been medically evaluated prior to use. NOTE: Abatement certification is required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.134 F01
- Issued
- Nov 15, 2013
- Abate by
- Jan 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): (a) Gun shop & range: On or about June 24, 2013 and at times prior thereto, an employee required to wear a respirator had not been fit tested prior to use. NOTE: Abatement certification is required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.134 H02 I
- Issued
- Nov 15, 2013
- Abate by
- Jan 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve: (a) Gun shop & range: On or about June 24, 2013 and at times prior thereto, a respirator being worn by an employee was not being stored properly to protect it from contamination and dust. NOTE: Abatement certification is required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.134 K
- Issued
- Nov 15, 2013
- Abate by
- Jan 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary: (a) Gun shop & range: On or about June 24, 2013 and at times prior thereto, an employee required to wear a half-face MSA respirator had not been properly and effectively trained. NOTE: Abatement certification is required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 451110)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339159964.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.