LONGVIEW, TX ·
OSHA Inspection: T & S QUALITY SERVICES
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of T & S QUALITY SERVICES in 5217 WEST LOOP 281 SOUTH, LONGVIEW, TX 75603 (NAICS 332813). OSHA activity number 339165078.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- T & S QUALITY SERVICES
- Site address
- 5217 WEST LOOP 281 SOUTH
- City
- LONGVIEW
- State
- TX
- ZIP
- 75603
- Mailing
- 5217 WEST LOOP 281 SOUTH, LONGVIEW, TX 75603
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 22
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.95 C01
- Issued
- Dec 16, 2013
- Abate by
- Jan 13, 2014
- Penalty
- Initial $2,800 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average (TWA) sound level of 85 decibels measured on the A scale (dBA), or equivalently a dose of fifty percent: This violation occurred on or about July 31, 2013, when the employer had not administered a hearing conservation program for employees exposed to noise that exceeded an 8-hour TWA of 85 dBA: a. In the abrasive blasting area, a blaster was exposed to noise levels at 732.7% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 732.7% is approximately 104.3 dBA. Sampling was performed for 293 minutes during one shift. Zero exposure was assumed for the unsampled period of 187 minutes. b. In the abrasive blasting area, a blaster was exposed to noise levels at 132.3% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 132.3% is approximately 92.0 dBA. Sampling was performed for 291 minutes during one shift. Zero exposure was assumed for the unsampled period of 189 minutes.
Recent events (2)
- · I (S) $1250
- · Z (S) $2800
1910.134 E01
- Issued
- Dec 16, 2013
- Abate by
- Jan 13, 2014
- Penalty
- Initial $1,600 · Current $700 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: This violation was discovered on or about July 1, 2013, when employees who wore supplied-air respirators or air-purifying respirators during abrasive blasting operations had not been medically evaluated to determine their fitness to wear the respirators.
Recent events (2)
- · I (S) $700
- · Z (S) $1600
1910.134 I07
- Issued
- Dec 16, 2013
- Abate by
- Dec 24, 2013
- Penalty
- Initial $2,800 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.134(i)(7): Only a high temperature alarm was used on oil lubricated compressor(s) and the air from the compressor was not monitored at intervals to prevent carbon monoxide levels in the breathing air from exceeding 10 parts per million (ppm): This violation was discovered on or about July 1, 2013, in the abrasive blasting area, where an oil-lubricated compressor used to supply breathing air to respirators was not equipped with a carbon monoxide alarm nor had the employer monitored breathing air for carbon monoxide.
Recent events (2)
- · I (S) $1250
- · Z (S) $2800
More inspections at T & S Quality Services
View T & S Quality Services's full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339165078.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.