BEAUMONT, TX ·
OSHA Inspection: BARBAY MACHINE WORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BARBAY MACHINE WORKS, INC. in 1030 MILAM, BEAUMONT, TX 77701 (NAICS 331210). OSHA activity number 339177016.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BARBAY MACHINE WORKS, INC.
- Site address
- 1030 MILAM
- City
- BEAUMONT
- State
- TX
- ZIP
- 77701
- Mailing
- 1030 MILAM, BEAUMONT, TX 77701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 7
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Jul 26, 2013
- Abate by
- Aug 13, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) At the worksite, on July 11, 2013, and at times prior to, employees who used the 10 ton Dura Press (model number 10DA, serial number 201008) were exposed to chips and flying parts becuase the press was not guarded.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
1910.212 A03 II
- Issued
- Jul 26, 2013
- Abate by
- Aug 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) At the worksite, on July 11, and at times prior to, the 10 ton Dura Press (model number 10DA, serial number 201008) was not equipped with a guard to prevent employees from having body parts in the point operation.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.134 F02
- Issued
- Jul 26, 2013
- Abate by
- Aug 28, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: a) At the worksite, on July 11, 2013, and at times prior to, the painter using the 3M model number 6000 half face respirator had not been fit tested since 2006.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 331210)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339177016.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.