OSHA Inspection: CALABRO PROPERTIES

Issued

Jul 25, 2013

Abate by

Aug 4, 2013

Penalty

Initial $2,800 · Current $1,680 Reduced

General-duty citation text

29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii)    a)  At the jobsite, on or about 7/2/13:  Employees were working at the top of a tubular welded frame scaffold in excess of 10 feet from ground and the work platform was not fully planked.      Abatement certification must be submitted for this item.

Issued

Jul 25, 2013

Abate by

Oct 31, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:; Such activities were not performed only by experienced and trained employees selected for such work by the competent person.    a)  At the jobsite, on or about 7/2/13:  Employees were working at the top of a tubular welded frame scaffold in excess of 10 feet from ground and not fully planked that was not erected or inspected by a competent person      Abatement certification must be submitted for this item.

Issued

Jul 25, 2013

Abate by

Aug 4, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level.  a)  At the jobsite, on or about 7/2/13:  Employees were not protected from falls when working at the top of a tubular welded frame scaffold in excess of 10 feet from ground.    Abatement certification must be submitted for this item.

Issued

Jul 25, 2013

Abate by

Oct 31, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.    a)  At the jobsite, on or about 7/2/13:  Employees were working at the top of a tubular welded frame scaffold in excess of 10 feet from ground and were not trained on recognition of and minimization of hazards related to work on this scaffold.      Abatement certification must be submitted for this item.

Issued

Jul 25, 2013

Abate by

Aug 4, 2013

Penalty

Initial $2,800 · Current $1,680 Reduced

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    a)  At the jobsite, on or about 7/2/13:  Employees were working on the upper surface of a porte cochere/deck approximately13 feet from ground without fall protection of any kind.    batement certification must be submitte for this item.

Issued

Jul 25, 2013

Abate by

Apr 30, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    a)  At the jobsite, on or about 7/2/13:  Employees were working on the upper surface of a porte cochere/deck approximately 13 feet from ground without fall protection of any kind and without being trained on the hazards and protective measures when working at heights.      batement certification must be submitte for this item.