BRISTOL, RI ·
OSHA Inspection: HALL INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HALL INC. in 33 BROADCOMMON RD, BRISTOL, RI 02809 (NAICS 332999). OSHA activity number 339204620.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HALL INC.
- Site address
- 33 BROADCOMMON RD
- City
- BRISTOL
- State
- RI
- ZIP
- 02809
- Mailing
- 33 BROADCOMMON RD, BRISTOL, RI 02809
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 52
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 9, 2013
- Abate by
- Sep 24, 2013
- Penalty
- Initial $3,080 · Current $1,540 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts: (a) Machine shop: The rotating chuck of the MSC lathe was not provided with an adequate guard or guarding device, on or about 7-10-13. (b) Machine shop: The rotating chuck of the Tray-Top Cintilathe lathe was not provided with an adequate guard or guarding device, on or about 7-10-13.
Recent events (2)
- · I (S) $1540
- · Z (S) $3080
1910.304 G05
- Issued
- Aug 9, 2013
- Abate by
- Aug 26, 2013
- Penalty
- Initial $3,080 · Current $1,540 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: (a) SCR Room: The ground pin on the plug of the power cord of the Infratech SRU-1615 portable infrared unit was missing, and thus the path to ground from the unit was not permanent, continuous, and effective, on or about 7-10-13.
Recent events (2)
- · I (S) $1540
- · Z (S) $3080
1910.178 L06
- Issued
- Aug 9, 2013
- Abate by
- Sep 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) Facility: The employer did not certify that each forklift operator was trained and evaluated as required by this paragraph (l), on or about 7-10-13.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.303 B02
- Issued
- Aug 9, 2013
- Abate by
- Sep 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Machine shop: The 6 outlet Relocatable Power Tap (power strip) that was in use powering a grinder and a light fixture was not installed in accordance with instructions from the manufacturer and included in the listing and labeling, UL 1363, in that it was used as a substitute for fixed wiring, on or about 7-10-13.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Hall INC.
View Hall INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339204620.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.