POTSDAM, NY ·
OSHA Inspection: RAYMOND ROULEAU
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAYMOND ROULEAU in SNELL SOFTBALL FIELD DUGOUT 8 CLARKSON AVENUE, POTSDAM, NY 13699 (NAICS 238130). OSHA activity number 339207417.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAYMOND ROULEAU
- Site address
- SNELL SOFTBALL FIELD DUGOUT 8 CLARKSON AVENUE
- City
- POTSDAM
- State
- NY
- ZIP
- 13699
- Mailing
- BOX 3 RIVER ROAD, HANNAWA FALLS, NY 13647
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.304 F
- Issued
- Sep 5, 2013
- Abate by
- Sep 17, 2013
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Electrically driven equipment was not equipped with magnetic switches or other devices that will prevent automatic restarting of the machine after a power failure: a) Snell Softball Field Dugout, Clarkson University - On or about 17 July, 2013 - Employees were using a table saw to rip wood that did not have an anti restart device on the table saw.
Recent events (2)
- · I (S) $800
- · Z (S) $1600
1926.304 H01
- Issued
- Sep 5, 2013
- Abate by
- Sep 17, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: a) Snell Softball Field Dugout, Clarkson University - On or about 17 July, 2013 - Employees were using a table saw to cut wood that was not guarded by a hood which enclosing the saw blade above the table.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.304 F
- Issued
- Sep 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Snell Softball Field Dugout, Clarkson University - On or about 17 July, 2013 - Employees were using a table saw to rip wood that did not have a spreader installed on the table saw.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.304 F
- Issued
- Sep 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) Snell Softball Field Dugout, Clarkson University - On or about 17 July, 2013 - Employees were using a table saw to rip wood that did not have non-kickback fingers installed on the table saw.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.405 G02 IV
- Issued
- Sep 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) Snell Softball Field - On or about 17 July, 2013 - Employees were using a table saw that was missing the strain relief on the plug.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 238130)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339207417.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.