WAYNESBORO, GA ·
OSHA Inspection: COLLUM'S LUMBER PRODUCTS, LLC
Fatality or catastrophe inspection · Safety discipline
At a glance
On , OSHA opened a fatality or catastrophe safety inspection of COLLUM'S LUMBER PRODUCTS, LLC in ALONG MILL HAVEN ROAD, WAYNESBORO, GA 30830 (NAICS 113310). OSHA activity number 339212623.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COLLUM'S LUMBER PRODUCTS, LLC
- Site address
- ALONG MILL HAVEN ROAD
- City
- WAYNESBORO
- State
- GA
- ZIP
- 30830
- Mailing
- 1723 BARNWELL ROAD P.O. BOX 535, ALLENDALE, SC 29810
What kind of inspection was it?
- Inspection type
- Fatality or catastrophe (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 113310
- Employees
- 160
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.333 C03 I B
- Issued
- Jan 13, 2014
- Abate by
- Feb 7, 2014
- Penalty
- Initial $6,300 · Current $6,300
General-duty citation text
29 CFR 1910.33(c)(3): Operations near overhead electrical lines were not conducted in accordance with the 29 CFR 1910.33(c)(3): a) At the site, on July 16, 2013, the employer did not ensure that an employee, who was engaged in operating a Peterson Horizontal Grinder model 4700B, operated the grinder at distance of ten feet or greater from overhead electrical power lines active with 14,300 volts, as required by CFR 29 1910.333(c)(3)(i)(B), exposing the employee to the hazards associated with electrocution and burns. ABATEMENT CERTIFICATION AND DOCUMENTATION ARE REQUIRED.
Recent events (3)
- · F (S) $6300
- · C (S) $6300
- · Z (S) $6300
1910.266 F01 III
- Issued
- Jan 13, 2014
- Abate by
- Jan 24, 2014
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.266(f)(1)(iii): The employer did not ensure that the operating and maintenance instructions are available on the machine or in the area where the machine is being operated. Each machine operator and maintenance employee shall comply with the operating and maintenance instructions. a) At the logging site, on or about and at times prior to July 18, 2013, the employer did not ensure that the manufacturer's operator and maintenance manual of a Peterson 4700B Horizontal Grinder was maintained with or near the grinder during operation, exposing employees to the hazards associated with death, burns, electric shock, bruises, and lacerations. ABATEMENT CERTIFICATION IS REQUIRED
Recent events (3)
- · F (S) $0
- · C (S) $4500
- · Z (S) $4500
1910.266 G01
- Issued
- Jan 13, 2014
- Abate by
- Feb 7, 2014
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.266(g)(1): The employer did not ensure that each vehicle used to perform any logging operation is maintained in serviceable condition. a) At the logging site, on or about and at times prior to July 18, 2013, the employer did not ensure that a motor vehicle used at the site to maneuver a Peterson 4700 B Horizontal Grinder was maintained in serviceable conditions in that the windshield was cracked and damaged, exposing employees to the hazards associated with death, broken bones, sprains, and lacerations. ABATEMENT CERTIFICATION AND DOCUMENTATION ARE REQUIRED
Recent events (3)
- · F (S) $0
- · C (S) $4500
- · Z (S) $4500
1910.332 B01
- Issued
- Jan 13, 2014
- Abate by
- Feb 7, 2014
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments:(a) (LOCATION) (IDENTIFY SPECIFIC OPERATIONS AND/OR CONDITIONS) a) At the site, on July 16, 2013, the employer did not ensure employees who were performing logging related grinding work at a logging site were effectively trained to maintain a safe working distance of ten feet or greater from overhead electrical power lines that were active with 14,300 volts, exposing the employees to the hazards associated with electrocution, electric shock, and burns. ABATEMENT CERTIFICATION AND DOCUMENTATION ARE REQUIRED.
Recent events (3)
- · F (S) $0
- · C (S) $4500
- · Z (S) $4500
More inspections in this industry (NAICS 113310)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339212623.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.