SCHAUMBURG, IL —
OSHA Inspection: ARC INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ARC INDUSTRIES, INC. in 2020 HAMMOND DRIVE, SCHAUMBURG, IL 60173 (NAICS 333511). OSHA activity number 339223273.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARC INDUSTRIES, INC.
- Site address
- 2020 HAMMOND DRIVE
- City
- SCHAUMBURG
- State
- IL
- ZIP
- 60173
- Mailing
- 2020 HAMMOND DRIVE, SCHAUMBURG, IL 60173
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333511
- Employees
- 30
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Aug 7, 2013
- Abate by
- Sep 10, 2013
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energiizng, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Shop Area - The employer failed to establish a program that included energy control procedures for employees to follow, employee training, and periodic inspections to protect employees performing set up and maintenance/servicing from injury caused by unexpected start up and energy releases. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $3500
1910.178 L02 II
- Issued
- Aug 7, 2013
- Abate by
- Sep 10, 2013
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. (a) Facility Wide - The employer did not ensure that each fork lift truck operator successfully completed training consisting of a combincation of formal instruction, practical training, and evaluation of the operator's performance in the workplace prior to operating the fork lift trucks. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $3500
1910.178 L06
- Issued
- Aug 7, 2013
- Abate by
- Sep 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) Facility Wide - The employer did not certify that each operator of the powered industrial vehicles had been trained and evaluated. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $0
1910.38 A
- Issued
- Aug 7, 2013
- Abate by
- Sep 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.38(a): The employer did not establish a written emergency evacuation plan for employees expected to evacuate in the event of a fire or other emergency. (a) Facility Wide - A written emergency evacuation plan was not established. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (O) $0
More inspections at ARC Industries, INC.
View ARC Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333511)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339223273.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.