PORT CHESTER, NY ·
OSHA Inspection: LANZA CORP. DBA SIGN DESIGN
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LANZA CORP. DBA SIGN DESIGN in 501 WILLET AVENUE, PORT CHESTER, NY 10573 (NAICS 339950). OSHA activity number 339223869.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LANZA CORP. DBA SIGN DESIGN
- Site address
- 501 WILLET AVENUE
- City
- PORT CHESTER
- State
- NY
- ZIP
- 10573
- Mailing
- 501 WILLET AVENUE, PORT CHESTER, NY 10573
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 10
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 15, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. a) Job Site, 501 Willet Avenue, Port Chester, NY, Basement Shop Area: "Makita Portable Cutting Saw". The front guard was not provided on the 12" blade cutting saw; on or about 7/18/13.
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.303 F02
- Issued
- Aug 15, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $1,360 · Current $800 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident. a) Job site, 501 Willet Ave, Port Chester, NY,10573, Basement Shop Area, South wall: Three circuit breakers were not marked; on or about 7/18/13.
Recent events (2)
- · I (S) $800
- · Z (S) $1360
1910.303 G02 I
- Issued
- Aug 15, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more shall be guarded against accidentalcontact by use of approved cabinets or other forms of approved enclosures or by any of the following means: a) Job Site, 501 Willet Avenue, Port Chester, NY, 10573, Basement Shop Area, South Wall: The circuit breaker panel was not provided with a cover, on or about 7/18/13.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Lanza Corp. DBA Sign Design
View Lanza Corp. DBA Sign Design's full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339223869.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.