ORDWAY, CO ·
OSHA Inspection: RDALE CONSTRUCTION, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RDALE CONSTRUCTION, LLC in 630 MAIN ST, ORDWAY, CO 81063 (NAICS 238160). OSHA activity number 339225047.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RDALE CONSTRUCTION, LLC
- Site address
- 630 MAIN ST
- City
- ORDWAY
- State
- CO
- ZIP
- 81063
- Mailing
- 232 MAIN ST, ORDWAY, CO 81063
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 3
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.502 F01 I
- Issued
- Sep 9, 2013
- Penalty
- Initial $2,400 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.502(f)(1)(i): When no mechanical equipment was being used the warning line was not erected at least 6 feet (1.8m) from the roof edge: (a) South and West roof edges: On or about July 16, 2013, and at times prior, rdale Construction, as controlling employer, did not ensure that Dunagan Roofing workers were protected from falling more than 11.5 feet to the ground where the warning line was positioned 22 inches from the roof edge.
Recent events (2)
- · I (S) $1200
- · Z (S) $2400
1926.502 F02 I
- Issued
- Sep 9, 2013
- Abate by
- Oct 3, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(f)(2)(i): The rope, wire, or chain was not flagged at no more than 6-foot intervals with high-visibility material: (a) South and West roof edges: On or about July 16, 2013, and at times prior, rdale Construction, as controlling employer, did not ensure that Dunagan Roofing workers were protected from falling more than 11.5 feet to the ground where the warning line flags were placed at intervals greater than 6 feet. Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.502 F02 II
- Issued
- Sep 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(f)(2)(ii): The rope, wire, or chain was not rigged or supported in such a way that its lowest point (including sag) was not less than 34 inches from the walking/working surface and its highest point no more than 39 inches from the walking/working surface: (a) South and West roof edges: On or about July 16, 2013, and at times prior, rdale Construction, as controlling employer, did not ensure that Dunagan Roofing workers were protected from falling more than 11.5 feet to the ground where the warning line sagged to within several inches of the roof deck.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.502 H01 IV
- Issued
- Sep 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(h)(1)(iv): The safety monitor was not close enough to communicate orally with employees: (a) South and West roof edges: On or about July 16, 2013, and at times prior, rdale Construction, as controlling employer, did not ensure that Dunagan Roofing workers were protected from falling more than 11.5 feet to the ground where the safety monitor was not close enough to communicate verbal commands to roofers working near the roof edge.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.503 A02 III
- Issued
- Sep 9, 2013
- Abate by
- Oct 3, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(2)(iii): The employer did not assure that each employee has been trained, as necessary, by a competent person in the use and operation of guardrail systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used. (a) Establishment: On or about July 16, 2013, and at times prior, the safety monitor was not sufficiently trained to understand and provide instructions. Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 238160)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339225047.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.