Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: VALLEY MATERIAL CO. INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of VALLEY MATERIAL CO. INC. in 201 MARSHALL ROAD, VALLEY PARK, MO 63088 (NAICS 327320). OSHA activity number 339237687.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Valley Material CO. INC. — free Get an email when a new federal OSHA severe-injury report for Valley Material CO. INC. is published. One employer, no account, unsubscribe in one click.
Site address
201 MARSHALL ROAD
City
VALLEY PARK
State
MO
ZIP
63088
Mailing
201 MARSHALL ROAD, VALLEY PARK, MO 63088
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327320
Employees
25
Ownership type
A

4 citations on file for this inspection.

1910.23 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 29, 2013
Abate by
Dec 17, 2013
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1910.23(e)(1): Standard railing(s) did not consist of top rail, intermediate rail and/or posts and/or did not have a vertical height of 42 inches (106.7 cm) nominal from upper surface of top rail to floor, platform runway, or ramp level:    Location:  201 Marshall Road, Valley Park, MO  63088    The southeast gravel bin quadrant had a six foot section of the railing system missing the intermediate rail.  This inadequate railing system is located at the east side of the gravel bin where the fixed industrial ladder descended to the twelve inch wide platform along the east perimeter.  The platform to ground height is approximately ______ feet.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1910.146 C01

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 29, 2013
Abate by
Nov 25, 2013
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces:    Location:  201 Marshall Road, Valley Park, MO  63088    All permit required confined spaces at the worksite were not identified as such prior to workers entering them including, but not limited to, the elevated gravel bin that welders entered to perform repairs as determined on July 26, 2013.
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

1910.146 C02

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 29, 2013
Abate by
Nov 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.146(c)(2): The employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces:  NOTE: A sign reading DANGER-PERMIT-REQUIRED CONFINED SPACE, DO NOT ENTER or using other similar language would satisfy the requirement for a sign.  Location:  201 Marshall Road, Valley Park, MO  63088  Employees were not informed by signs or other effective means of the existence and location of and the dager posed by all permit required confined spaces on site including, but not limited to, the elevated gravel bin that welders entered to repair damaged walls as determined on July 26, 2013.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.146 C08 I

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 29, 2013
Abate by
Nov 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.146(c)(8)(i): When an employer arranged to have employees of another employer (contractor) perform work that involved permit space entry, the host employer did not inform the contractor that the workplace contained permit spaces and that permit space entry is allowed only through compliance with a permit space program:  Location:  201 Marshall Road, Valley Park, MO  63088   Valley Material Co. Inc. hired Valley Park Welding employees to perform welding repairs within the elevated gravel bin and did not inform the welders that permit space entry is allowed only through compliance with a permit space program.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Valley Material CO. INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339237687.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.