OSHA Inspection: LAKESIDE CABINS, LTD.

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $3,080 · Current $1,540 Reduced

General-duty citation text

29 CFR 1910.177(c)(1)(i): The employer did not assure that no employee services any multi-piece rim wheel unless the employee has been trained and instructed in the correct and safe operating procedures described in 29 CFR 1910.177(f) for servicing multi-piece rim wheels:    a) Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July17, 2013, the employer failed to train employees in the hazards of servicing rim wheels.  Employees were exposed to struck-by hazards when servicing rim wheels of the Caterpillar forklift (model P6000; s/n AT13F03302).

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $3,080 · Current $1,540 Reduced

General-duty citation text

29 CFR 1910.177(d)(4): The employer did not furnish or assure that employees use an air line assembly which includes a clip-on chuck, an in-line valve with a pressure gauge or a presettable regulator, and a sufficient length of hose between the clip-on chuck and in-line valve:     a) Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July17, 2013, the employer failed to provide components of an air-line assembly that would allow employees to safely inflate tires.  A clip-on chuck, in-line valve with pressure gauge and sufficient length hose was not provided and/or used to allow an employee to stand outside of the trajectory while inflating a tire(s) of the Caterpillar forklift (model P6000; s/n AT13F03302).

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $3,080 · Current $1,540 Reduced

General-duty citation text

29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11):    a) Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July 17, 2013, the employer failed to establish a safe operating procedure which would protect employees from struck-by hazards when servicing multi-piece rim wheels.  Safe procedures to deflate and inflate tires and to handle multi-piece rim wheels outside of the trajectory were not implemented.  An employee sustained serious injuries when servicing rim wheels of the Caterpillar forklift (model P6000; s/n AT13F03302).

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $3,080 · Current $1,540 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July17, 2013, employees operated a powered industrial vehicle(s) to lift and maneuver bundles of lumber.  The employer did not assure that employees successfully completed a forklift operator training program containing elements in 29 CFR 1910.178(l) before being permitted to operate the forklift.

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(l)(5): The employer did not evaluate the competency of the operator who had previously received training appropriate to the truck and working conditions encountered:    a) Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July17, 2013, the employer did not evaluate a fork truck operator's performance who was previously provided forklift training by another employer.  A lead production employee operated the forklift to move lumber.

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $1,760 · Current $880 Reduced

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s):    a) Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July17, 2013, the employer did not assure the Caterpillar forklift (model P6000; s/n AT13F03302) was removed from service during a time in which the tires would not retain proper air pressure.  Underinflated tires may hinder the safe operation of the lift.

Issued

Nov 27, 2013

Abate by

Jan 20, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:    a) Lakeside Cabins, Ltd. - Shiloh, Ohio: On or about July17, 2013, the employer did not assure forklifts were examined daily for conditions that affect the truck's safety.  The Caterpillar forklift (model P6000; s/n AT13F03302) was not in safe operating condition in that the tires would not retain proper air pressure.