Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DEAN'S BODY SHOP

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of DEAN'S BODY SHOP in 9164 READING ROAD, CINCINNATI, OH 45215 (NAICS 811121). OSHA activity number 339243164.

Watch Dean'S Body Shop — free Get an email when a new federal OSHA severe-injury report for Dean'S Body Shop is published. One employer, no account, unsubscribe in one click.
Establishment
DEAN'S BODY SHOP
Site address
9164 READING ROAD
City
CINCINNATI
State
OH
ZIP
45215
Mailing
9164 READING ROAD, CINCINNATI, OH 45215
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
2
Ownership type
A

7 citations on file for this inspection.

1903.19 D01

Other-than-serious 3 instances 2 exposed
Issued
Abate by
Penalty
Initial $400.00 · Current $400.00
29 CFR 1903.19(d)(1): The employer did not submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:  (a)    Dean's Body Shop failed to provide documentation demonstrating the abatement methods and completion as cited in Citation 1 for hazards associated with; 2) a written respiratory program including physical evaluations, fit testing and employee training for employees required to wear 3M tight fitting face piece respirators with organic vapor cartridges and for Citation 2 for hazards associated with; 1) employees wearing 3M 8210 dust mask for voluntary usage who were not provided information in Appendix D of 1910.134; and 3) a written hazard communication program which included labeling requirements for all containers of hazardous chemicals and employee training on chemicals such as but not limited to hexamethylene diisocynante.
Recent events (1)
  • — Z (O) $400

1910.107 C05

Serious Gravity 1 1 instance 2 exposed
Issued
Penalty
Initial $1200.00 · Current $500.00 Reduced

Hazardous substances 00401080137717502460

29 CFR 1910.107(c)(5):  Electrical equipment not approved for locations containing both deposits of readily ignitable residues and explosive vapors was present in spraying area(s):    (a)  The boom box stereo system in the paint room was not approved for locations where paint was sprayed.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $500
  • — Z (S) $1200

1910.107 C06

Serious Gravity 1 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 00401080137717502460

29 CFR 1910.107(c)(6): Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined were not explosion-proof type approved for Class I, group D locations and did not otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations:    (a)  The lights on the walls and ceiling of the paint spray area were not appropriately enclosed to prevent combustible residues from contacting exposed wires.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $500.00 Reduced

Hazardous substances 9965

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    (a)  The employer did not provide a written respiratory protection program which included physical evaluations, fit testing and employee training for employees who were required to wear 3M tight fitting face piece respirators with organic vapor cartridges when painting car bumpers and fenders in the paint spray area of the body shop with paint that contained isocyanates.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $500
  • — Z (S) $1200

1910.134 K06

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 9135

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:    (a)  Employees who wore 3M 8210 dust masks for voluntary use when doing body work on cars were not provided with the information in Appendix D of this standard.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.305 G01 IV B

Deleted Other-than-serious 1 instance 2 exposed
Issued
Penalty
Initial $400.00 · Current $0.00 Reduced

Hazardous substances 00401080137717502460

29 CFR 1910.305(g)(1)(iv)(B):  Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used when run through holes in walls, ceilings, or floors:  (a)  On or about August 6, 2013, the Pro Base paint system was powered by a large, orange extension cord that was run through a hole in the cinder block wall of the paint storage room and plugged into an outlet on the wall outside the paint room door.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $400

1910.1200 E01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $400.00 · Current $200.00 Reduced

Hazardous substances 00401080137717502460

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    (a)  The employer did not provide a written hazard communication program which included labeling requirements for all containers of hazardous chemicals and employee training for employees who paintied car bumpers and fenders in the paint spray area of the body shop with paint that contained hazardous chemicals, such as hexamethylene diisocyanate.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $200
  • — Z (O) $400

View DEAN'S BODY SHOP's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339243164.