Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BSG SERVICES

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of BSG SERVICES in 169 E HURON, BERLIN, WI 54923 (NAICS 561720). OSHA activity number 339244295.

Watch BSG Services — free Get an email when a new federal OSHA severe-injury report for BSG Services is published. One employer, no account, unsubscribe in one click.
Establishment
BSG SERVICES
Site address
169 E HURON
City
BERLIN
State
WI
ZIP
54923
Mailing
253 STOCKHAUSEN LN, WEST BEND, WI 53095
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
561720
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1960.00 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a)   On August 1, 2013, employer did not establish procedures for the utilization for the engaged activities in the laundry room. Employees are required to open a panel and clean without energy controls on the dryers. The paneled area of the dryer contains the wiring system for the dryer.        ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

1910.147 C07 I B

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure:  a)   On August 1, 2013, employer did not instruct the employees on the purpose and use of the energy control procedure. Employees are required to open a panel on the dryers for housekeeping reasons and the dryer is not locked out and tagged out. The paneled area of the dryer contains the wiring system for the dryer.       ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 D04 I

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  a)   On August 1, 2013, employer did not lockout or tagout the circuits energizing the parts that employees were exposed to. The employees are required once a month to go behind the dryers and vacuum lint that collects.     ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.264 D01 V

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
1910.264(d)(1)(v): Employer failed to train staff on hazards of work and instructed in safe practices, by verbal, printed, bulletins:  a)      On August 1, 2013, employer did not train employees on the hazards of cleaning behind and inside the dryers and dryer panels. The employees are required once a month to go behind the dryers and vacuum lint that collects.          ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.333 B02

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.333(b)(2): While an employee was exposed to contact with parts of fixed electric equipment or circuits which were deenergized, the circuits energizing the parts were not locked out or tagged or both in accordance with the requirements of this paragraph (b) of 29 CFR 1910.333(b)(2):  a)    On August 1, 2013, employer did not affix energy isolating devices by authorized employees. The employees are required once a month to go behind the dryers and vacuum lint that collects.            ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339244295.